Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Parts & Welding for Whitney Homeowners
Whitney’s older driveways have a way of showing their age. Gates hung in the 1990s have been through two decades of desert sun, monsoon dust, and thousands of open-and-close cycles, and the parts wear out long before the gate itself does. In neighborhoods like Silverado Ranch-adjacent streets off Warm Springs and the quiet cul-de-sacs near Whitney Ranch, we regularly see sagging hinges, cracked posts, and welds that gave out after years of metal fatigue. Our technicians have up to 13 years of experience and know this area’s failure patterns. Same-day availability is common, and a live person answers every call, day or night. Call (855) 928-1304.
What Our Gate Parts & Welding Service Includes
Hinge Replacement
A gate’s hinges carry every ounce of its weight, and when one fails, the whole gate drops. You’ll notice it starting to drag on the ground or scrape the drive before you see the crack. We carry heavy-duty hinges and weld-in replacements, cut out the failed unit safely, and rehang the gate on a level axis. Our team checks both sides of the swing so a replacement on one side doesn’t just push the problem to the other.

Post Replacement
When a gate post has rusted through or cracked, no amount of hinge adjustment will fix the sag. This is common in Whitney where posts set in desert soil take on moisture during the monsoon seasons. We set new posts to local code requirements, using the correct concrete footing depth for the weight of the gate, then rehang and weld the gate to the new post. Most post replacements happen within a single visit once we’ve assessed the site.

Rail Repair
Rails are the horizontal bars that give a gate its rigidity. A bent or cracked rail makes the gate wobble and throws off the alignment of the latch and operator. We weld repair rails back to structural strength or replace damaged sections with matched metal, then check that the gate swings true. On a wide estate gate, a single bad rail can pull the entire frame out of square, so catching it early matters.

Custom Welding
Sometimes the right repair is one that no off-the-shelf part can provide. Custom welding covers anything from reinforcing a tired gate frame to fabricating a replacement bracket for a vintage or unusual gate setup. We weld in mild steel and wrought iron and finish the joints to match the existing gate visually. Whether it’s a standalone weld repair or reinforcement ahead of a new opener install, the work is finished clean and inspected before we leave.
Gate Rollers
Sliding gates ride on rollers that live in the most exposed spot on the fence line. Desert grit, dirt, and sun bake the rolling surface until the wheels no longer turn, and the gate starts to grind or drag. We inspect the rollers, replace seized or flattened wheels, and align the track so the gate slides true. On heavier sliding gates, tired rollers can fool you into thinking the operator is failing when the real problem is mechanical.
Latch & Lock
A latch that won’t seat means a gate that doesn’t stay shut, and a lock that sticks means a homeowner fighting their own gate every time they come home. We replace failing latches with matched hardware, fit lock hardware to the gate’s existing frame and weather conditions, and verify the alignment between gate, post, and latch through the full swing cycle. Electronic and manual locks are both within scope, and we’ll make sure any new latch works correctly with your opener before we wrap up.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Brands We Service for Gate Parts & Welding
We’re trained and equipped on nine major gate automation brands, which means when your parts and welding job meets the automation side of your gate, you don’t have to call a second company. Ghost Controls systems show up on a lot of Whitney residential gates, and we know where their control boxes meet the mechanical frame, which hinges on the swing arms tend to wear first, and how to weld a repair that still leaves future service access intact. DoorKing setups on access-controlled gates need a different touch: heavy commercial-grade hardware where the latch and strike geometry affects how the operator reads the gate’s closed position.
Mighty Mule and Elite also come through our shop regularly, and each has its own pattern of wear. Mighty Mule setups often show up with rail or post issues from the weight of the operator on one side, while Elite gates tend to develop hinge fatigue before the motor ever hiccups. Whether your gate carries Ghost Controls, DoorKing, Elite, Mighty Mule, or any other make, we can help with the steel and the mechanical side, and cross over to the electronics when the repair calls for it.
Signs You Need Gate Parts & Welding Right Now
- Your gate drags on the ground or scrapes the drive. That’s a hinge or post failure, not just a nuisance. Left alone, it bends the frame itself and turns a smaller hinge repair into a full gate rebuild.
- You can see rust bleeding through a weld or a joint. Rust in a weld seam means the joint is weakening from the inside. Catching it now keeps the repair small instead of letting the weld fail entirely under the weight of the gate.
- The gate won’t latch on its own. A misaligned latch usually means the gate has shifted on its hinges, and the alignment problem gets worse the longer it runs. We reset the whole swing, not just the latch.
- Your sliding gate shudders or grinds as it moves. That’s a roller or track issue, and it wears the operator motor fast. Replacing seized rollers now protects the motor investment.
- The post leans visibly after a storm or a bump. A leaning post has lost its footing, and the loads it carries only increase as the gate sags. If it’s leaning enough to see, it’s worth an inspection this week.
Our Gate Parts & Welding Process – Step by Step
- 1
Call and talk to a live person, any hour. No voicemail, no callback list. We get the basics on the phone and schedule a visit, often same-day in Whitney.
- 2
On-site inspection with real diagnostic work. Our technician walks the gate, checks every hinge, post, roller, and weld, and tests the latch through the full swing. We don’t guess at what’s wrong.
- 3
Upfront pricing before any work begins. You get a written price on the repair and parts, and nothing gets done until you say go. The number on the estimate is the number on the bill.
- 4
Welding and parts work done right. Background-checked, uniformed technicians do the repair with the proper equipment, from cutting out a failed hinge to setting a new post to spec. Most jobs finish in a single visit.
- 5
Final test and the 90-Day Done Right Promise. We run the gate through its full cycle with you watching, confirm the latch, the swing, and the automation all work together, then back the job in writing for 90 days.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Whitney?
A typical hinge replacement in Whitney runs $120 – $280 depending on whether the hinge needs welding or simply bolts on. A post replacement runs $350 – $750, with the wide range reflecting footing depth, concrete work, and whether the gate needs rehanging. Rail repair sits around $180 – $400, custom welding runs $150 – $500 by scope, gate rollers land at $150 – $350 for the pair, and latch and lock work typically runs $95 – $260.
Several things drive the price: gate size and weight, the material of the gate (wrought iron, steel, aluminum), whether the repair touches the automation, and how accessible the post or hinge is on the site. To avoid overpaying, get the price in writing before the work starts and ask specifically about the parts being used. Our free estimate covers a full on-site inspection and a written price. Standing offers help too: $50 off any repair over $250, a free second opinion on any written estimate, and a 5% senior and veteran discount. Call (855) 928-1304 for an exact quote – estimates are free.
Gate Parts & Welding Near Whitney – Our Service Area
Whitney sits at the center of our gate parts and welding service, and we regularly reach homes in Sunrise Manor, Paradise, Winchester, Henderson, and Enterprise. Response times are usually within the day for Whitney and neighboring communities like Sunrise Manor and Paradise. See our Gate Parts & Welding in Sunrise Manor page for the nearby east-side service area, or read about the surrounding neighborhoods we cover.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Gate Parts & Welding in Whitney
Gate parts and welding service is the repair of every mechanical component on a gate other than the opener, from hinges and posts to rails, rollers, latches, and lock hardware, plus the welding work that holds the frame together. For Whitney homeowners, it covers the wear-and-tear repairs that keep an existing gate swinging true rather than replacing the gate. When the opener or automation is part of the problem, our gate repair service connects the two.
Most single-visit repairs finish in the same appointment, usually within a couple of hours on site. Hinge replacements and latch work are typically under two hours; post replacements or extensive custom welding can run half a day to the full day, especially when concrete footings are involved. We tell you the expected timeline at the estimate so you can plan the day. If a special part is needed and not on hand, we schedule a return visit and tell you exactly when we’ll be back.
Most gate parts and welding repairs in Whitney run between $95 and $750, with the final price set by the scope of the repair and the parts involved. Hinge replacement typically lands at $120 – $280, post replacement at $350 – $750, and latch and lock work at $95 – $260. The price quoted before work begins is the price on the bill. Call (855) 928-1304 for an exact quote – estimates are free.
Yes, we’re trained and equipped on all four: Mighty Mule, Elite, DoorKing, Ghost Controls, plus five other leading brands. Each brand’s machinery meets the gate frame differently, and knowing where that intersection wears is how we make the fix last. Even on mechanical repairs that don’t touch the electronics, we check that the final alignment works with the brand on your gate. For automation-related issues, see our gate motor and opener service.
Yes. A gate stuck open at night, a post that gave way after a storm, or a latch that won’t secure the property is an emergency, and we handle Whitney calls 24 hours a day, 7 days a week. A live person answers every call, so you’re not leaving a message and hoping. Call (855) 928-1304 and we’ll get a technician scheduled as fast as possible.
Every gate parts and welding job is covered by our 90-Day Done Right Promise, a written guarantee with no paperwork and no arguing. If the repair doesn’t hold, we come back and make it right, every time. The promise is in writing at the end of the job so you have it on file.
Clear the driveway on both sides of the gate and move anything stored near the fence line that a technician might need to get behind. If your gate is on an opener, leave the power on so we can test the full cycle. Have any prior repair records or warranty paperwork handy, and let us know about any pets that need to stay inside during the visit. Beyond that, we handle the rest.
Schedule Your Gate Parts & Welding Service in Whitney Today
A repair handled right on the first visit is the cheapest repair there is. Our technicians bring up to 13 years of experience to every Whitney gate, the price is settled before any work starts, and the 90-Day Done Right Promise backs the work in writing. Call (855) 928-1304 for a free estimate – a live person answers, day or night. See our Gate Parts & Welding in Paradise and our Whitney gate parts and welding service pages for more, or browse the home page to see the full scope.
Written by the team at Ironworks Gate Co.