Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Repair Services in Henderson, NV
If your driveway gate won’t latch, drags on the concrete, or the opener stopped responding, you’ve come to the right place. Ironworks Gate Co. handles gate repair across Henderson, from the HOA gates of Green Valley to the older manual gates near Water Street. A live person answers our line 24 hours a day, seven days a week, and most jobs are finished in a single visit. Call (855) 928-1304 and we’ll come take a look, quote a fair price upfront, and get your gate swinging right again.
Why Henderson Homeowners Choose Ironworks Gate Co. Whitney
Henderson homes sit behind gates that work hard in harsh conditions, and we’ve become a steady presence here because we fix them correctly the first time. Our technicians have up to 13 years of experience, are background-checked and uniformed, and work in your yard the way they’d work in their own mother’s. When a gate in Anthem or MacDonald Ranch starts sagging or the motor quits in the summer heat, homeowners call us back because we show up when we say we will and stand behind the work. Every job is covered by our written 90-Day Done Right Promise, no paperwork and no arguing. We’re trained on the automation brands you actually have in Henderson, including FAAC, BFT, Linear, and Viking, so we carry the right parts and make the correct fix on the first trip.
One thing we hear often: the last contractor left an invoice higher than the estimate. That won’t happen with us. We settle the price with you before a single bolt is turned, and there are no surprises on the bill. If you’re a senior or a veteran, our permanent 5% discount applies, always.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Repair Services We Offer in Henderson
Whether your gate is old ironwork that needs a weld or a modern automatic drive that quit, our scope covers the whole job. Here’s what we do across Henderson.
Gate Repair
From a hinge that’s worn loose to a weld that cracked in the heat, we fix gates so they close like the day they were hung. We handle sagging pivots, misaligned latches, bent frames, and operators that no longer respond. Learn more about our Gate Repair in Henderson.

Gate Installation
New driveway or estate gate, measured and matched to your property and your community’s rules. We set posts, hang the metal, and get everything square before we leave. Learn more about our Gate Installation in Henderson.

Gate Motor & Opener
If your operator is overheating in the Henderson sun or the remote quit, we service and replace motors on the major brands, including BFT and FAAC. We make sure the correct fix happens on the first visit. Learn more about our Gate Motor & Opener in Henderson.

Gate Access Control
Keypads, entry systems, and the control that tells your gate who comes and goes. When a keypad fails or a code stops working, we diagnose the whole chain, not just the obvious part. Learn more about our gate access control in Henderson.
Gate Parts & Welding
Hinges, rollers, brackets, and on-site welding for iron and aluminum gates. When a part fails, we source the right replacement rather than forcing something that doesn’t fit. Learn more about our gate parts and welding in Henderson.
Neighborhoods We Serve in Henderson
We cover gate work across the Henderson valley, and most calls in these neighborhoods get a response in a day or two, often sooner for emergencies.
- Green Valley
- Anthem
- MacDonald Ranch
- Seven Hills
- The older homes near Water Street and Basic Road
If your street isn’t on this list, call us anyway. We work throughout Henderson, including ZIP codes 89011, 89012, 89044, and 89074.
See the difference
Before
After
Before
After
Before
AfterWhy Henderson’s Climate & Housing Affect Gate Repair
Henderson is a desert town, and that shapes every gate we touch. Summer temperatures routinely climb past 105°F, which bakes automatic gate operators until they overheat and stall, and fades gate finishes even though the dry air keeps rust at bay most of the year. Then the wind kicks up dust off the open desert edges, coating the photoelectric safety sensors until they fail and the gate refuses to move. Pivot hinges wear and sag under that same heat and grit. When the rare monsoon bursts roll through, driving rain finds rusted seams and misaligned joints and makes them worse. Add in that most of Henderson’s housing is 1990s and 2000s master-planned stucco homes with decorative wrought-iron driveway and community gates, and you get a repair market that barely exists in older, un-gated parts of the Valley. In Anthem and Green Valley especially, we’re often called because an HOA has sent a violation letter over a leaning or faded gate, so the job becomes a deadline-driven fix plus repainting to the community’s approved color palette.
Pricing for Gate Repair in Henderson
Gate repair pricing in Henderson depends on what failed and how deep the fix goes. Below are honest ranges so you know roughly what to expect. The exact figure is quoted and agreed with you before any work starts, so there’s never a surprise on the bill.
| Service | Typical Range |
|---|---|
| Adjust or rehang a sagging gate | $150 – $300 |
| Hinge or pivot replacement | $120 – $260 |
| On-site weld repair | $140 – $320 |
| Safety sensor or keypad diagnosis and fix | $110 – $240 |
| Motor or operator repair | $200 – $500 |
We also offer $50 off any repair over $250 and a free second opinion on any written estimate you’ve received. For the full picture on what our separate service pages cover, see our home page.
Service Area – Cities Near Henderson
Henderson is our focus here, but gate work doesn’t stop at the city line. We also help homeowners in Boulder City, Whitney, Paradise, and Enterprise. If you’re just outside Henderson and your gate needs attention, call us and we’ll let you know how we can help.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Henderson
Gate repair in Henderson typically runs from about $110 for a sensor or keypad fix up to roughly $500 for a motor repair, and the price is always quoted and agreed before work begins. Call (855) 928-1304 for an exact quote – estimates are free.
In many cases, yes. A live person answers our line 24 hours a day, so call and we’ll tell you the soonest we can get out, often same day for a gate that’s stuck open or won’t close. Call (855) 928-1304 to get on the schedule.
Yes. In Anthem and Green Valley, an HOA violation over a leaning or faded gate is one of the most common calls we get. We fix the gate and can match repainting to your community’s approved color palette so it passes inspection. Call (855) 928-1304.
Henderson’s 105°F-plus summers routinely overheat automatic operators, and windblown dust coats the safety sensors until they fail. We diagnose whether it’s the motor or the sensors and make the correct fix on the first visit. Call (855) 928-1304 for an estimate.
We service the major brands found on Henderson driveways, including FAAC, BFT, Linear, and Viking, among the nine brands we’re trained on. Whatever is on your gate, we’ll know how to fix it. Call (855) 928-1304 to schedule a free estimate.
When your gate stops working, you don’t want a callback queue or a no-show. You want someone who answers, shows up, and gets it done right, backed in writing. Call Ironworks Gate Co. at (855) 928-1304 for a free estimate on gate repair in Henderson.
Written by the team at Ironworks Gate Co.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Henderson Customers Say
"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."
- Carrie Mercer"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram