A Ironworks company - serving Whitney, NV
Gate Motor & Opener in Henderson, NV | Ironworks Gate Co. Whitney

Gate Motor & Opener in Henderson - Free Survey, One Written Price

Free on-site survey and a written price that includes the groundworks, the power run and the safety gear. Install date agreed before we order, and the system handed over tested and documented.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Motor & Opener Across Henderson

If your driveway gate has stopped opening, reverses halfway, or answers the remote with nothing but a click, you’re in the right place. We handle gate motor and opener work across Henderson, from motor installation and repair to Linear and slide motor service, intercom integration, and battery backup. We know this city’s subdivisions well, we answer the phone live around the clock, and we settle the price with you before a single bolt is turned. Call (855) 928-1304 and we’ll get a technician out to your Henderson home.

Call (855) 928-1304

Why Ironworks Gate Co. Whitney Is Henderson’s Preferred Gate Motor & Opener Company

Henderson homeowners call us because the work gets done right and they don’t have to think about it again. Much of our gate motor and opener work here lands in the master-planned communities – Green Valley and Anthem especially – where HOA rules set the style and color of every gate. Our technicians have up to 13 years of experience and are background-checked and uniformed on every visit. We’re trained and equipped on nine gate-automation brands, so the correct fix happens on the first trip rather than the third. Most Henderson jobs are finished in a single visit.

Every job we complete is covered by our 90-Day Done Right Promise: if it isn’t right, we come back and make it right, in writing, no arguing. We also carry standing offers that help here – $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a 5% discount for seniors and veterans, always. When you call, a live person answers, 24 hours a day, seven days a week.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Motor & Opener Services in Henderson

Every gate we work on is treated as a system – the motor, the mount, the power, and the safety gear that keeps it legal and safe. Here’s how our core services play out across Henderson.

Motor Installation

Most of our installation calls in Henderson come from homeowners adding automation to a manual gate, or replacing a builder-grade operator that has finally given out. We size the motor to the actual weight and travel of your gate, then set an anchored mount that won’t work loose in the heat. Installation is scheduled, measured, and priced in writing before we start; it isn’t a same-day drop-in job, and we won’t pretend otherwise.

Motor Installation

Motor Repair

When a motor stalls, reverses, or quits, the cause is usually one of a few things: a dust-caked safety photocell, a stressed control board, or a hinge post that has sagged out of alignment. We diagnose the whole system rather than swapping a part and hoping. Repair pricing is quoted to you first and agreed before any work starts.

Motor Repair

Linear Motor

Linear operators are common on Henderson’s newer subdivisions, and they’re solid units right up until the heat and grit catch up with them. We service and repair Linear motors, including the rack-and-pinion drive and the safety sensors, and we re-aim or replace photocells that keep tripping the gate. If a Linear unit is past saving, we’ll tell you plainly and give you your options.

Linear Motor

Slide Motor

Slide gates need a level track and a motor sized for a heavy rolling load. In Henderson, windblown dust packs into the track and photo eyes, and the operator starts stalling or refusing to finish its run. We clean, align, and repair slide operators and confirm the entrapment protection actually works. If you’re weighing a slide gate versus a swing gate, or need intercom or battery backup on either, we’ll walk you through what fits your driveway and your HOA.

If your issue falls outside these – a bent gate, a bad keypad, a weld that cracked – our Gate Motor & Opener team handles the full spread of driveway and estate gate work, hinges and welds through keypads and automation.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 928-1304

Trusted Brands We Service in Henderson

We’re trained and equipped to service nine major gate-automation brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so whatever is hanging on your driveway, we’ve worked on it. We don’t claim to stock parts on a shelf locally; instead, we identify the correct part on the first visit and get it moving quickly, which matters when your gate is your main way in and out. Ghost Controls, DoorKing, Elite, and Mighty Mule units all turn up regularly in Henderson’s neighborhoods, and we know their failure patterns. No surprises, no runaround.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Motor & Opener Problems We See in Henderson Homes

  • Builder-grade operators that were never sized for the gate. Many 1990s and 2000s subdivisions went up with an operator matched to the builder’s budget, not the gate’s weight. In 105°F-plus Henderson heat, these units overheat and stall long before a properly sized motor would.
  • Dust-caked safety photocells. Windblown dust from the open desert edges coats the photo eyes on Anthem and Green Valley gates, and the operator reads it as an obstruction. The gate reverses or refuses to close, and the homeowner has no idea the culprit is a dirty sensor.
  • Automation added to a manual gate without the right foundation. When a gate was installed manual and automated afterward, we often find the hinge post footing undersized and the pivot hinges sagging. The fix is sag correction at the hinge post plus a properly anchored operator mount, not just a new motor.
  • Rusted seams and misaligned gates after monsoon rain. The dry climate preserves paint, but the intense UV bakes it and rare driving rain finds every rusted seam. Misaligned gates then bind and stress the motor.

Pricing for Gate Motor & Opener in Henderson, NV

Here’s what gate motor and opener work typically runs in Henderson. A motor repair usually lands between $180 and $420, depending on whether we’re replacing a control board, a photocell, or the drive assembly. Replacing a failed operator with a correctly sized new one generally runs $650 to $1,600 installed, and automating a manual gate – which often means retrofitting a post footing, conduit, and a low-voltage power run – comes in around $900 to $2,200. Battery backup and intercom integration are quoted per job. These are real ranges, and your written estimate replaces guesswork: the price is agreed before any work starts, and it doesn’t change after. Estimates are free. Call (855) 928-1304 for yours.

We Also Serve Cities Near Henderson

We work throughout the Henderson area and the surrounding communities. If you’re in Boulder City, Whitney, Paradise, or Enterprise, we can help too. For everything we do in this part of the valley, see Gate Motor & Opener in Henderson. One call covers it, and a live person answers.

Serving Henderson, NV – Our Local Coverage Area

We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Motor & Opener in Henderson

Why Henderson Chooses Ironworks Gate Co. Whitney

We set the standard for gate motor & opener in Henderson.

30-60 Min Response

Fast dispatch across Henderson. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Henderson

Getting your gate motor & opener handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate motor & opener needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Henderson - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate motor & opener pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Henderson Customers Say

Trusted by homeowners across Henderson and surrounding areas.

★★★★★

"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."

Carrie Mercer
★★★★★

"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."

Jamal Dawson
★★★★★

"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."

Devon Ingram

Ready for Gate Motor & Opener in Henderson?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Henderson.

(855) 928-1304

Request a Free Estimate in Henderson

Tell us about your gate motor & opener needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch