Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Henderson
If your gate is leaning, dragging, or a hinge has started to grind, we handle the metalwork and the parts that keep it standing. We work across Henderson every week, from the HOA gates in Anthem to the older ranch properties off Water Street, and we know what the desert does to iron and steel here. A live person answers our phone around the clock, and most repair calls get a firm price before anyone touches the gate. Call (855) 928-1304 and we’ll get you a free estimate.
Why Ironworks Gate Co. Whitney Is Henderson’s Preferred Gate Parts & Welding Company
Henderson homeowners call us back because the price we quote is the price on the bill, and the work is backed in writing. Our technicians bring up to 13 years of experience with them, and every job carries our 90-Day Done Right Promise. If something isn’t right, we come back and make it right.
We’re not the lowest bid, and we don’t try to be. We’re the call you make once. Around Green Valley and Anthem, that matters, because HOA architectural rules are strict about gate styles and colors, and a sloppy repair gets a violation letter. We match and source the approved ironwork instead of bolting on whatever fits.
Response times to Henderson are quick, and we settle the price with you before a single bolt is turned. That’s a square deal, plain and simple. Technicians are background-checked and uniformed, and they work in your yard the way they’d work in their own mother’s.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Henderson
This is the metal end of gate repair: hinges, posts, rails, and the welding that holds them together. Our Gate Parts & Welding team handles the whole scope, and it’s the work that stops small problems from turning into a gate that won’t close at all.
Hinge Replacement
In Henderson’s heat, pivot hinges wear and sag, and a sagging gate drags on the ground by the end of summer. We replace worn hinges with properly sized hardware and re-align the gate so it swings true. On heavier wrought-iron driveway gates, we check the post as well, because a good hinge on a weak post won’t hold long.

Post Replacement
Posts set shallow during the original build are common in Henderson’s newer subdivisions, and they lean once the ground settles or a monsoon storm pushes against a heavy gate. We pull the old post, set a new one to depth, and brace it so the gate hangs square again. This is often the real fix when a gate has been “repaired” twice and still sags.

Rail Repair
Loose, bent, or rusted rails get straightened, re-welded, and refinished. Blown dust and grit wear at the joints over the years, and a rattling gate usually traces back to a tired rail. We weld it solid and check the whole frame while we’re at it.

Custom Welding
Sometimes a gate needs more than a fix: a new section, a reinforcement, or a match to an HOA-approved style. We weld custom ironwork on site and blend the finish to the rest of the gate. Every weld is backed by the same written guarantee as the rest of the job.
Trusted Brands We Service in Henderson
We’re trained and equipped on nine gate-automation brands, including Ghost Controls, DoorKing, Elite, and Mighty Mule, so the right fix happens on the first visit regardless of what’s on your driveway. We don’t claim a local parts warehouse; instead we source what’s needed and turn jobs around quickly. In Anthem and Green Valley especially, that speed matters when an HOA deadline is ticking. Call (855) 928-1304 and tell us what’s on your gate; we’ll tell you what it takes.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Henderson Homes
- Builder-grade operators on gates that were built manual. In newer subdivisions, an operator is often added to a manual swing gate without the power or conduit to run it properly, so the motor overloads and burns out early. The gate itself may be fine; the install is what failed.
- Missing or undersized power and conduit runs. This is the big one in Henderson’s master-planned communities. Without a dedicated circuit and proper conduit buried at the build stage, voltage drops, the gate runs intermittently, and the motor takes the damage.
- HOA deadline repairs. Leaning or faded gates draw violation letters, and homeowners need a fast, code-compliant fix in the community’s approved color. We match the palette and get the gate back in line before the deadline.
- Dust-coated sensors and worn pivots. Blown desert grit coats photoelectric safety sensors until they fail and grit works into pivot hinges until the gate binds. A worn hinge looks like a motor problem but usually isn’t.
Pricing for Gate Parts & Welding in Henderson, NV
Henderson’s market runs a lot like the rest of the Valley, but HOA-driven jobs add a bit of finish work. A typical hinge replacement in Henderson runs $180 – $360, depending on the gate’s weight and count. Post replacement generally runs $350 – $750 when a new post is set to proper depth. Rail repair and minor welding land around $150 – $400. Custom welding to match an HOA-approved style runs $250 – $900 or more for larger sections. If your gate also needs a power and conduit run for automation, that’s separate electrical work and gets its own line on the quote. We give you a free estimate and settle the price with you before any work starts.
We Also Serve Cities Near Henderson
We also take calls from Boulder City, Whitney, Paradise, and Enterprise. The same metalwork and parts service we bring to Henderson applies across those nearby towns, and the quotes are the same square deal. If you’re not sure whether your address is covered, call (855) 928-1304 and we’ll tell you straight.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Henderson
Because the operator was added to a gate that was built manual, usually without a dedicated power circuit or conduit run. In Green Valley and Anthem, gates often go in without pre-wiring, so a later operator pulls current through undersized wiring, voltage drops, and the motor overheats and burns out. A proper fix means running a dedicated circuit and conduit to the gate and checking the hinge post while we’re there. Call (855) 928-1304 for a free estimate.
Often yes. HOA architectural rules in communities like Anthem and MacDonald Ranch dictate exact gate styles and colors, so a repair has to match the approved palette, not just any black or bronze. We match and source HOA-approved ironwork and repaint to the community’s color. Call (855) 928-1304 and we’ll confirm what your community requires.
A shallow-set post or a worn pivot hinge, and in the newer subdivisions it’s usually the post. When the gate was built, the post may not have gone to full depth, and the ground settles or a monsoon storm pushes a heavy gate against it. We inspect the post before assuming it’s just the hinge. Call (855) 928-1304 for an exact quote; estimates are free.
Blown desert dust coats the photoelectric safety sensors until they fail, and grit works into moving parts and pivot points. That’s why gates here go intermittent long before the motor is actually dead. A seasonal tune-up clears the dust and checks the sensors, which saves a motor replacement. Call (855) 928-1304 to schedule.
Yes, but the cost depends heavily on whether power and conduit already reach the gate. If they don’t, which is common in Henderson’s newer master-planned communities, you’ll need trenching and electrical work alongside the operator, and that’s the line item most homeowners don’t see coming. We measure, order, and schedule this work; it isn’t a same-day job, but we give you a free measure and a written price first. Call (855) 928-1304 to set it up.
Every gate repair and weld we do in Henderson is backed in writing by our 90-Day Done Right Promise. Senior and veteran customers get a standing 5% discount, and there’s $50 off any repair over $250. Call Ironworks Gate Co. at (855) 928-1304 for a free estimate.
Written by the team at Ironworks Gate Co.