Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Repair Services in Whitney, NV
If your driveway gate has started to drag, stick, or stop halfway, you’re not imagining it – and you’re not the only one on your block. Whitney’s 1980s-to-2000s tract homes were fitted with builder-grade ornamental gates, and after a couple of decades of desert sun and monsoon runoff, those gates are failing in predictable ways all over town. Ironworks Gate Co. is the local gate specialist for that exact problem: we fix sun-baked, poorly drained, long-neglected gates and make them work like new. A live person answers our phone 24 hours a day, every day, at (855) 928-1304 – call and we’ll get a real answer to you fast.
Why Whitney Homeowners Choose Ironworks Gate Co. Whitney
Most Whitney gates we see aren’t custom ironwork jobs that failed – they’re builder-grade installs that were never meant to last this long. That changes what “done right” looks like here, and it’s why homeowners off Warm Springs Road and in the neighborhoods near Whitney Ranch keep calling us back.
Our technicians have up to 13 years of experience, are background-checked and uniformed, and work in your yard the way they’d work in their own mother’s. We’re trained and equipped on nine gate-automation brands – including Linear, Viking, and DoorKing – so the correct fix gets made on the first visit, whatever is bolted to your driveway. And every completed job is backed in writing by our 90-Day Done Right Promise: if it’s not right, we come back and make it right. No arguing, no paperwork games, no exceptions.
Whitney homeowners tend to be settled – many have been in the same house twenty years or more – and they’ve heard enough empty promises from one-truck outfits. We’re not the cheapest bid. We’re the last call you’ll need to make.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Repair Services We Offer in Whitney
Gate Repair
Sagging gates, dragging gates, rusted hinges, heaving posts, latches that miss by an inch – we handle the whole repair list, and most Whitney jobs are finished in a single visit with the price settled before we turn a bolt. Learn more about our Gate Repair in Whitney.

Gate Installation
When a gate is past saving, we measure, order, and install a replacement built for Whitney’s heat and soil – including proper footings that don’t rely on the caliche the old installer fought with. This is measured, scheduled work, so we quote a written price up front and never rush it. Learn more about our Gate Installation in Whitney.

Gate Motor & Opener
Operator failing, arm binding, remote that only works from six feet away – we service and replace motors across nine major brands and set the limits and safety edges correctly the first time. Learn more about our Gate Motor & Opener in Whitney.

Gate Access Control
Keypads, entry systems, and remotes that quit talking to each other get sorted out on a scheduled visit, with a written price before work begins. Learn more about gate access control in Whitney.
Gate Parts & Welding
Rusted hinge straps, bent frames, cracked welds – our shop setup lets us fabricate and weld the small parts the big-box stores won’t carry, matched to the original gate. Learn more about gate parts and welding in Whitney.
Neighborhoods We Serve in Whitney
We cover the whole Whitney area, with fast response across the neighborhoods where gates take the most abuse.
- Whitney Ranch
- Neighborhoods off Warm Springs Road
- The tracts near Whitney Mesa
- Side streets near Russell Road
- Homes along Boulder Highway
Call before noon and we can usually be out the same day for repair work.
See the difference
Before
After
Before
After
Before
AfterWhy Whitney’s Climate & Housing Affect Gate Repair
This is the part most gate companies miss about Whitney. The housing stock here is overwhelmingly single-family stucco on small lots with block walls, and many properties still run the builder’s original tubular steel or aluminum driveway and side-yard gates with the factory hardware. That original hardware was never built for what Whitney throws at it. Summer heat over 110°F expands and warps metal year after year, and monsoon season sends water straight into gate posts and hinges, accelerating rust and shifting footings. In the neighborhoods off Warm Springs Road, posts often sit in caliche-hard soil that cracks and settles after the rains – so a gate that swung clean in April will drag and miss the latch by fall. That’s why gate repair in Whitney is less about fancy ironwork and more about correcting decades of sun-baked, poorly drained installs. We check the footing and drainage first, because a hinge swap on a heaving post just buys you one more season.
Pricing for Gate Repair in Whitney
Here’s the honest ballpark for Whitney gate work. Every job is quoted and agreed with you before any work starts, so there’s no surprise on the bill.
| Job | Typical range |
|---|---|
| Hinge, latch, or hardware replacement | $150-$350 |
| Gate sag correction / post adjustment | $200-$450 |
| Welding repair on frame or hinge strap | $175-$400 |
| Motor or opener repair | $250-$600 |
| Full operator replacement | $900-$2,200 |
| New gate installation | $2,500-$7,500+ |
Standing offers apply: $50 off any repair over $250, an $89 seasonal tune-up, a permanent 5% senior and veteran discount, and a free second opinion on any written estimate. Call (855) 928-1304 for an exact quote – estimates are free.
Service Area – Cities Near Whitney
Whitney sits inside the valley, and we cover the surrounding communities too – including nearby Sunrise Manor, Winchester, Paradise, and Las Vegas. Same craft, same written promise, same upfront pricing wherever you are. If you’re just outside the Whitney line, call and we’ll confirm coverage.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Whitney
Most Whitney gate repairs run $150 to $450, with hinge and latch fixes near the low end and post or sag corrections higher. Weather-driven failures here often include a footing or hinge issue, which is why we inspect before quoting. Call (855) 928-1304 for an exact quote – estimates are free.
In most cases, yes. Call before noon and we can typically get a technician out the same day for repair work in Whitney, since sagging and stuck gates are the bulk of what we do here. A live person answers 24 hours a day, so call (855) 928-1304.
Whitney’s heat over 110°F and monsoon runoff attack builder-grade gates hard, warping metal and driving water into posts and hinges. The caliche soil off Warm Springs Road makes it worse, cracking and shifting footings so gates drag within a season. Call us for an inspection before the next failure.
A full installation includes measuring, ordering, footing work, hanging, and setting up any operator or access control, all quoted in writing before we start. Installation is scheduled work, not same-day, so we take the time to get the drainage and footings right for Whitney’s soil. Call (855) 928-1304 for a free estimate.
Yes. For operators and access control we handle the electrical setup and safety edges so the gate reverses correctly and meets code – this is scheduled work with a written price agreed upfront. Call (855) 928-1304 to schedule a free estimate.
When your Whitney gate starts dragging or your opener stops answering, call Ironworks Gate Co. Whitney at (855) 928-1304 for a free estimate. We’ll give you a square deal, an upfront price, and a job backed in writing by our 90-Day Done Right Promise – done right, and we stand behind it.
Written by the team at Ironworks Gate Co.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Whitney Customers Say
"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."
- Carrie Mercer"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram