Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Repair Services in Sunrise Manor, NV
Gate repair in Sunrise Manor starts with knowing what’s actually on the driveway: wide sliding gates, double-swing driveways, and side-yard RV gates hung on block walls and old wrought iron, not the little garden gates you see in newer parts of the valley. We repair, automate, weld, and install those gates for homeowners across the 89110 corridor, and most repair calls get sorted in a single visit with the price settled before we touch a bolt. Our technicians have up to 13 years of experience, and a live person answers the phone around the clock. Call (855) 928-1304 and tell us what the gate is doing – or not doing.
Why Sunrise Manor Homeowners Choose Ironworks Gate Co. Whitney
Most of the folks who call us here have been in the same house for twenty years or more, and they’ve already dealt with a handyman who said he’d come back and didn’t. We don’t operate that way. Every job is backed by our written 90-Day Done Right Promise: if it isn’t right, we come back and make it right, no paperwork and no arguing. That’s the Keystone Standard, and it applies to a hinge adjustment in the 89110 flats the same as it does to a full driveway gate rebuild.
We’re trained and equipped on nine gate-automation brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so whatever operator is bolted to your gate, the correct fix happens on the first trip rather than the third. Background-checked, uniformed technicians show up ready to work in your yard the way they’d work in their own mother’s. And when you call, a live person answers, not a voicemail tree, not a callback queue that leaves you waiting until Monday. Homeowners off Charleston Boulevard and around the Sunrise Manor community areas tell us the same thing: they want it done once, correctly, and backed in writing. That’s the whole promise.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Repair Services We Offer in Sunrise Manor
Everything below is the full scope of what we do on a Sunrise Manor gate – from the weld at the hinge to the keypad at the curb. Each service has its own page where we go deeper.
Gate Repair
Sagging double-swing gates, gates that drag on the concrete, corroded hinges, split posts, and welds that gave out after a monsoon dust season – this is the bread and butter of Sunrise Manor gate work. We diagnose the actual cause before quoting, because a gate that drags is usually a post or a hinge problem, not a gate problem. Learn more about our Gate Repair in Sunrise Manor.

Gate Installation
When a gate is past saving, or you want a new sliding driveway gate where there was only chain link, we install to fit the lot. Setting new posts here means dealing with caliche, so we plan for it and quote for it honestly rather than discovering it halfway through. Learn more about our Gate Installation in Sunrise Manor.

Gate Motor & Opener
Heat bakes operators and UV degrades their housings, so motor service is a real part of Sunrise Manor gate repair. We service FAAC, BFT, Linear, Viking, and the rest of the nine brands we’re equipped for. Learn more about our Gate Motor & Opener in Sunrise Manor.

Gate Access Control
Keypads, remotes, intercoms, and entry systems that let you in without getting out of the car – particularly useful on a long side-yard gate off an unpaved drive. We handle the wiring and the setup so the gate answers to you reliably. Call us to talk through access control options for your property.
Gate Parts & Welding
Rollers, tracks, hinges, latches, and on-site welding to repair wrought iron and steel frames rather than replace them. A good weld on a forty-year-old gate can keep it working for years more. Call us for parts and welding in Sunrise Manor.
Neighborhoods We Serve in Sunrise Manor
We work the whole 89110 corridor and the streets around it. Most repair calls in this area are scheduled quickly, and emergency gate problems get priority when we can get to them.
- The Boulder Highway corridor and its side streets
- Charleston Boulevard and the neighborhoods north of it
- The Sunrise Manor community areas and nearby tracts
- The larger-lot parcels east of the main drags
Why Sunrise Manor’s Climate & Housing Affect Gate Repair
Sunrise Manor is unincorporated Clark County, and that shapes the work in ways a newer master-planned community never will. Most of the housing stock is 1950s through 1980s single-story ranch and manufactured homes on generous lots, and a lot of the fencing and driveway gates are original – chain link, block wall, and wrought iron that’s been baking in the desert sun for decades. The heat routinely pushes past 105°F in summer, which dries out lubricants, warps wood and vinyl, and degrades operator housings. Then the monsoon season rolls dust and flash-flood runoff through unpaved side yards and shifts posts and footings that were set years ago. And because the soil here is hard caliche, setting a new post often means hitting rock within a foot and reaching for a breaker bar, not just a shovel. That’s why we quote post work honestly and plan for the ground we’re actually standing on. For anything involving a live operator, high-tension hardware, or a heavy gate overhead, we keep the work in trained hands – that’s not a place for a homeowner with a wrench.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Sunrise Manor
We quote every job upfront and agree the price with you before any work starts, so there are no surprises on the bill. Typical ranges for common repairs:
| Service | Typical Range |
|---|---|
| Hinge, latch, or roller replacement | $120 – $280 |
| Gate alignment and drag correction | $150 – $350 |
| On-site welding repair | $180 – $400 |
| Post reset or replacement (caliche factored in) | $250 – $600 |
| Gate operator service or repair | $200 – $500 |
Standing offers apply: $50 Off Any Repair Over $250, a Free Second Opinion on Any Written Estimate, an $89 Seasonal Tune-Up, and a permanent 5% Senior and Veteran discount. Call (855) 928-1304 for an exact quote – estimates are free.
Service Area – Cities Near Sunrise Manor
We also work the communities around Sunrise Manor, including home base coverage that reaches Whitney, Winchester, Las Vegas, and North Las Vegas. If your gate is just over the line from the 89110 corridor, we can usually get to it on the same schedule.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sunrise Manor
Most common gate repairs in Sunrise Manor run between $120 and $400, with post work and operator service higher depending on what’s found. You get an upfront price agreed before any work begins. Call (855) 928-1304 for an exact quote – estimates are free.
Often, yes – most repair calls in the Sunrise Manor area get scheduled quickly, and emergency gate problems get priority when we can. Call (855) 928-1304 and a live person will tell you what’s available today.
Yes. The wider sliding and double-swing driveway gates and the side-yard RV gates common on Sunrise Manor’s larger parcels are the bulk of what we repair, along with block-wall and wrought-iron fencing. Call (855) 928-1304 to describe your gate and get a ballpark.
Extreme heat, UV, and monsoon dust combine with aging original fencing and gates to wear hardware faster here. The combination of 105°F+ summers and flash-flood runoff shifts posts and dries out lubricants. A seasonal tune-up goes a long way – our $89 Seasonal Tune-Up is built for exactly this. Call (855) 928-1304 to schedule one.
Yes – every job is backed by our written 90-Day Done Right Promise, which means if it isn’t right, we return and fix it. No paperwork, no arguing. Call (855) 928-1304 for a free estimate.
Get Your Sunrise Manor Gate Fixed Right
If your gate is dragging, sagging, or just not answering to the remote, give us a call. We’ll come out, tell you what’s actually wrong, settle the price upfront, and back the work in writing. Call Ironworks Gate Co. Whitney at (855) 928-1304 for a free estimate – a live person answers any hour, any day.
Written by the team at Ironworks Gate Co. Whitney.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Sunrise Manor Customers Say
"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."
- Carrie Mercer"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram