A Ironworks company - serving Whitney, NV
Gate Parts & Welding in North Las Vegas, NV | Ironworks Gate Co. Whitney

Gate Parts & Welding in North Las Vegas - Welded and Fitted, Priced Up Front

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across North Las Vegas

If a gate on your property is dragging, sagging, or caught on a latch that no longer lines up, you’re in the right place. Ironworks Gate Co. is the dedicated gate specialist for North Las Vegas homeowners, and our technicians have up to 13 years of experience diagnosing what’s actually wrong instead of guessing at the opener. We know this city block by block – the older ranch properties near downtown, the sprawling subdivisions out toward 89084 and 89085, the industrial fencing along Losee Road. When you call, a live person answers, day or night. For a free estimate on gate parts and welding in North Las Vegas, reach us at (855) 928-1304.

Call (855) 928-1304

Why Ironworks Gate Co. Whitney Is North Las Vegas’s Preferred Gate Parts & Welding Company

North Las Vegas has grown in two very different waves, and a gate company that works here has to know both. Around downtown and the 89030 corridor you’ll find 1960s and ’70s single-story ranch homes with wrought-iron and chain-link driveway gates that have been through fifty summers of desert heat. Out in the 89031, 89085, and 89081 subdivisions, the housing is newer – many of these master-planned homes are only five to fifteen years old – yet the gates are already failing because the ground underneath them has moved. We work both. A square deal starts with an upfront price settled before a single bolt is turned, and our 90-Day Done Right Promise backs every job in writing.

Homeowners in North Las Vegas call us because the last contractor didn’t come back. We do. When a latch misses or a hinge post has heaved, the quote is agreed before we start, and if something isn’t right within 90 days, we return and make it right – no arguing, no paperwork chase. That’s the Keystone Standard, and it applies to every gate we touch in North Las Vegas.

Our technicians are background-checked and uniformed, and they work in your driveway the way they’d work in their own family’s. They’re trained and equipped on nine gate-automation brands, so whether it’s a FAAC operator or a Linear unit on the post, the correct fix gets made. We also keep standing offers that make sense for the homeowners here: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in North Las Vegas

This is where the real work happens – the metal, the posts, the welds. You can see the full scope of what we handle on our Gate Parts & Welding page, but here’s how it plays out in North Las Vegas specifically.

Hinge Replacement

Most sagging gates in North Las Vegas don’t need a new gate – they need the hinges replaced and re-set correctly. A builder-grade ornamental steel gate in a 2000s subdivision often starts dragging because the hinge post has heaved out of plumb in the valley’s expansive soil, and the usual fix is to reset the footing and re-align the hinges rather than just tweaking the panel. A typical hinge replacement in North Las Vegas runs $150 – $300 depending on how many hinges and whether the post needs attention.

Hinge Replacement

Post Replacement

Because North Las Vegas’s caliche and expansive soils shift with irrigation and monsoon moisture, gate posts in newer north-side subdivisions like 89031 and 89084 commonly settle out of plumb within a few years. That’s the typical call here – a gate that sags no matter how many times you adjust the hinges, because the post itself has moved. Resetting a footing or replacing a post in North Las Vegas usually runs $400 – $900, and it’s often the real cure that operator repair alone can’t deliver.

Post Replacement

Rail Repair

Rails take a beating from monsoon dust and wind storms that knock sliding gates out of alignment on their tracks, especially where debris builds up in tight rights of way. We straighten, re-weld, and re-hang rails so the gate travels true again. Rail repair on a North Las Vegas driveway gate typically lands in the $200 – $500 range, and the fix usually restores the gate without a full replacement.

Rail Repair

Custom Welding

In older 89030 ranch properties, rust-locked chain-link drive gates frequently fail at the latch or hinge, and a qualified welder may need to cut out and replace the rusted section before re-hanging the gate. Custom welding also handles bent ornamental panels, broken pickets, and gate frames that have cracked from the heat. Custom welding on a North Las Vegas gate typically runs $150 – $450 per repair, quoted before we start.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 928-1304

Trusted Brands We Service in North Las Vegas

We’re trained and equipped on nine gate-automation brands, and the ones that show up most often on North Las Vegas driveways include FAAC, BFT, Linear, and Viking. We don’t keep a warehouse or stocked parts trucks – parts are ordered for your specific gate, which is how you get the right fit instead of a universal approximation. That means turnaround is measured, not rushed: we measure, order, and schedule the work, then quote a written price before we begin. It’s the honest way to do it, and it’s why the fix holds.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Parts & Welding Problems We See in North Las Vegas Homes

  • Hinge posts settling out of plumb in expansive caliche soil. This is the number-one reason gates in the 89031 and 89084 subdivisions drag and latch-miss even after hinge adjustment. The post has moved, not the panel.
  • UV and heat degradation of operator seals, photo-eyes, and painted steel in 105 – 115°F summers. The desert sun bakes operator seals and photo-eyes faster here than in most US markets, and painted steel breaks down right along with them. That’s why finish and operator failure often arrive together.
  • Monsoon dust and wind storms stripping finishes and knocking sliding gates out of alignment. The July – September storms pack grit into tracks and push gates off true, especially where debris accumulates in tight rights of way.
  • Rust-locked chain-link drive gates on older 89030 ranch homes. Fifty years of heat and dry air means latches and hinges seize, and the gate fails at the joint rather than the panel. A welder often has to cut out the rusted section before re-hanging it.

One local insight worth understanding: North Las Vegas’s growth came in two very different waves – 1960s – ’70s ranch homes around downtown and massive 2000s-onward master-planned subdivisions out in 89081 and 89085. That means a gate company here routinely works on rust-locked fifty-year-old chain-link drive gates and builder-grade ornamental gates that are only five to fifteen years old and already failing. The east-side 89030 and 89032 corridor also brings commercial sliding cantilever and chain-link security gates along the I-15/Losee and Cheyenne industrial belts, so this isn’t only residential work.

Pricing for Gate Parts & Welding in North Las Vegas, NV

Here’s what things actually cost in the North Las Vegas market. A typical hinge replacement runs $150 – $300; post resetting or replacement runs $400 – $900; rail repair lands around $200 – $500; and custom welding runs $150 – $450 per repair. Sliding-gate track realignment usually falls between $250 and $600, and a post reset that includes a new concrete footing sits at the higher end because of the excavation and cure time. Several factors move the number: whether the post needs a new footing, how much rust has to be cut out, and whether the gate is ornamental steel, aluminum, or chain-link. The price is quoted and agreed before any work starts, and it doesn’t change on the bill. Estimates are free, and a free second opinion on any written estimate is always available. Call (855) 928-1304 for an exact quote.

We Also Serve Cities Near North Las Vegas

We handle gate parts and welding across the valley, including Gate Parts & Welding in North Las Vegas and the surrounding communities of Las Vegas, Sunrise Manor, Winchester, and Whitney. If your property sits near the edge of the city, we still make the trip. The same written guarantee and upfront pricing apply wherever the gate is.

Serving North Las Vegas, NV – Our Local Coverage Area

We serve North Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in North Las Vegas

Why North Las Vegas Chooses Ironworks Gate Co. Whitney

We set the standard for gate parts & welding in North Las Vegas.

30-60 Min Response

Fast dispatch across North Las Vegas. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in North Las Vegas

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in North Las Vegas - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What North Las Vegas Customers Say

Trusted by homeowners across North Las Vegas and surrounding areas.

★★★★★

"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."

Carrie Mercer
★★★★★

"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."

Jamal Dawson
★★★★★

"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."

Devon Ingram

Ready for Gate Parts & Welding in North Las Vegas?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in North Las Vegas.

(855) 928-1304

Request a Free Estimate in North Las Vegas

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch