A Ironworks company - serving Whitney, NV
Gate Parts & Welding in Sunrise Manor, NV | Ironworks Gate Co. Whitney

Gate Parts & Welding in Sunrise Manor - Welded and Fitted, Priced Up Front

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Sunrise Manor

When a driveway gate starts dragging after a dust storm or a post leans after a hard rain, Sunrise Manor homeowners call us because we know this ground. The hard caliche under most lots here means a post repair is a different job than it is in a newer community, and the wide block-wall driveway gates common along Boulder Highway and the 89110 corridor need the right parts on hand. We quote the work before anything starts, and our technicians bring up to 13 years of experience to each job. Call (855) 928-1304 and a live person will answer, day or night.

Call (855) 928-1304

Why Ironworks Gate Co. Whitney Is Sunrise Manor’s Preferred Gate Parts & Welding Company

We’re not the cheapest bid in the east valley. We’re the call you make once and don’t have to make again. Sunrise Manor isn’t a master-planned subdivision of tiny patio gates; it’s a wide, unincorporated stretch of larger lots and older ranch homes where full driveway gates and side-yard RV gates do the real work, and we treat that job with the care it deserves. Our standing offers are real: $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% senior and veteran discount.

The company’s own service record is built on the same promise on every street in Sunrise Manor: the 90-Day Done Right Promise. If a weld cracks or a hinge fails after we’ve been out, we come back and make it right, in writing, no arguing. We also stand behind our work with a background-checked, uniformed technician on every job, working in your yard the way we would in our own mother’s.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Sunrise Manor

The heat and dust here wear down the same parts year after year on wide block-wall and side-yard gates. Here’s where we spend most of our time in Sunrise Manor, and what a fair price looks like.

Hinge Replacement in Sunrise Manor

Corroded hinges are one of the most common calls we get on the double-swing driveway gates that are everywhere in the older parts of Sunrise Manor. When a hinge seizes or the weld holding it gives, the gate drops and drags against the block wall. A typical hinge replacement in Sunrise Manor runs $120 – $260 per gate leaf, and we set the hinge square so the gate swings true again instead of binding on the post.

Hinge Replacement in Sunrise Manor

Post Replacement in Sunrise Manor

This is the Sunrise Manor job that trips people up. The soil here is hard caliche, and a hinge post that has shifted in saturated ground often can’t be re-set with a shovel. We break up the caliche properly, set the post in a proper footing, and check that the gate still clears the wall on a wide sliding run. A typical post replacement in Sunrise Manor runs $350 – $750 depending on post size, footing depth, and whether we’re replacing a metal or block-set post.

Post Replacement in Sunrise Manor

Rail Repair in Sunrise Manor

Wind-driven dust and UV bake the rails on older wrought-iron and chain-link gates until joints rust and rattle. We reweld broken rails, replace bent sections, and check that the gate frame is still square before it goes back on the track. A typical rail repair in Sunrise Manor runs $95 – $280.

Rail Repair in Sunrise Manor

Custom Welding in Sunrise Manor

When a gate needs a bracket, a support gusset, or a new latch plate that isn’t in any catalog, we fabricate it on site. Custom welding in Sunrise Manor runs $110 – $300 for most small fabrications, and we test every weld under load before we sign off. No gate is put back into service until we’re sure it will hold.

All of this work falls under our Gate Parts & Welding team. Whatever’s on your driveway, we have the tools and the training to get it fixed right the first time.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 928-1304

Trusted Brands We Service in Sunrise Manor

We’re trained and equipped across nine gate-automation brands, including FAAC, BFT, Linear, and Viking, so we can diagnose and repair the operator controlling your gate rather than guessing. When a motor component fails, we source the correct part and get it to your gate on a scheduled visit. No part stash is carried on a truck, but we know these operators well enough to identify what’s wrong on the first call and quote the right fix. Whether your Sunrise Manor gate runs a FAAC swing operator or a Linear slide unit, the correct fix is made on the first scheduled visit.

Common Gate Parts & Welding Problems We See in Sunrise Manor Homes

  • Wind-driven dust jams rollers and racks on block-wall driveway gates. Fine grit from east-valley dust storms works into the rollers and the rack and pinion, and the gate starts binding and travelling unevenly. A roller cleaning that turns up a shifted roller carriage can quickly turn into a post-footing job.
  • Monsoon runoff undermines post footings in unpaved side yards. Saturated soil around an older post causes it to lean, and the gate then sags or drags on the track. On caliche ground, that post usually can’t be re-set with a shovel.
  • Extreme heat bakes lubricants and UV-degrades operator housings. Summer highs above 105°F dry out every moving part, and the sun cracks keypad faces and safety photocell lenses. The operator may still open, but the safety sensors can stop working without warning.
  • Older gate hardware on 1950s – 1980s ranch homes is simply worn out. Latch assemblies rust solid, hinges seize, and rollers flat-spot after decades of use. Replacing those parts properly restores a gate that was built to last.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Gate Parts & Welding in Sunrise Manor, NV

Sunrise Manor gate work is priced by the job, not the hour. A typical roller cleaning and lubrication runs $90 – $180, and if the rollers are flat-spotted or the carriage has failed, new rollers run $140 – $320 for a two-roller set. Hinge replacement runs $120 – $260 per gate leaf, post replacement $350 – $750, and custom welding $110 – $300 for most small fabrications. What moves the number is the ground: a caliche footing takes more work than a standard set, and a wide double-swing gate needs more time than a single leaf. Every price is quoted and agreed in writing before we start. Call (855) 928-1304 for a free estimate, and ask about the $50 off any repair over $250.

We Also Serve Cities Near Sunrise Manor

Sunrise Manor sits right up against Whitney, Winchester, Las Vegas, and North Las Vegas, and we serve gate parts and welding work in all of them. If you’re in a neighboring community, see our Gate Parts & Welding in Sunrise Manor page and ask us about scheduling to your area. The same upfront pricing and 90-Day Done Right Promise goes with us.

Serving Sunrise Manor, NV – Our Local Coverage Area

We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Sunrise Manor

Call Ironworks Gate Co. Whitney for Gate Parts & Welding in Sunrise Manor

When a Sunrise Manor gate drags, leans, or jams after a storm, we’ll be there when we say, quote the work before anything starts, and back it with the written 90-Day Done Right Promise. Call (855) 928-1304 for a free estimate. A live person answers every call, day or night.

Written by the team at Ironworks Gate Co.

Why Sunrise Manor Chooses Ironworks Gate Co. Whitney

We set the standard for gate parts & welding in Sunrise Manor.

30-60 Min Response

Fast dispatch across Sunrise Manor. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Sunrise Manor

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Sunrise Manor - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Sunrise Manor Customers Say

Trusted by homeowners across Sunrise Manor and surrounding areas.

★★★★★

"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."

Carrie Mercer
★★★★★

"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."

Jamal Dawson
★★★★★

"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."

Devon Ingram

Ready for Gate Parts & Welding in Sunrise Manor?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Sunrise Manor.

(855) 928-1304

Request a Free Estimate in Sunrise Manor

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch