A Ironworks company - serving Whitney, NV
Gate Parts & Welding in Henderson, NV | Ironworks Gate Co. Whitney

Gate Parts & Welding in Henderson - Welded and Fitted, Priced Up Front

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Henderson

If your gate is leaning, dragging, or a hinge has started to grind, we handle the metalwork and the parts that keep it standing. We work across Henderson every week, from the HOA gates in Anthem to the older ranch properties off Water Street, and we know what the desert does to iron and steel here. A live person answers our phone around the clock, and most repair calls get a firm price before anyone touches the gate. Call (855) 928-1304 and we’ll get you a free estimate.

Call (855) 928-1304

Why Ironworks Gate Co. Whitney Is Henderson’s Preferred Gate Parts & Welding Company

Henderson homeowners call us back because the price we quote is the price on the bill, and the work is backed in writing. Our technicians bring up to 13 years of experience with them, and every job carries our 90-Day Done Right Promise. If something isn’t right, we come back and make it right.

We’re not the lowest bid, and we don’t try to be. We’re the call you make once. Around Green Valley and Anthem, that matters, because HOA architectural rules are strict about gate styles and colors, and a sloppy repair gets a violation letter. We match and source the approved ironwork instead of bolting on whatever fits.

Response times to Henderson are quick, and we settle the price with you before a single bolt is turned. That’s a square deal, plain and simple. Technicians are background-checked and uniformed, and they work in your yard the way they’d work in their own mother’s.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Henderson

This is the metal end of gate repair: hinges, posts, rails, and the welding that holds them together. Our Gate Parts & Welding team handles the whole scope, and it’s the work that stops small problems from turning into a gate that won’t close at all.

Hinge Replacement

In Henderson’s heat, pivot hinges wear and sag, and a sagging gate drags on the ground by the end of summer. We replace worn hinges with properly sized hardware and re-align the gate so it swings true. On heavier wrought-iron driveway gates, we check the post as well, because a good hinge on a weak post won’t hold long.

Hinge Replacement

Post Replacement

Posts set shallow during the original build are common in Henderson’s newer subdivisions, and they lean once the ground settles or a monsoon storm pushes against a heavy gate. We pull the old post, set a new one to depth, and brace it so the gate hangs square again. This is often the real fix when a gate has been “repaired” twice and still sags.

Post Replacement

Rail Repair

Loose, bent, or rusted rails get straightened, re-welded, and refinished. Blown dust and grit wear at the joints over the years, and a rattling gate usually traces back to a tired rail. We weld it solid and check the whole frame while we’re at it.

Rail Repair

Custom Welding

Sometimes a gate needs more than a fix: a new section, a reinforcement, or a match to an HOA-approved style. We weld custom ironwork on site and blend the finish to the rest of the gate. Every weld is backed by the same written guarantee as the rest of the job.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 928-1304

Trusted Brands We Service in Henderson

We’re trained and equipped on nine gate-automation brands, including Ghost Controls, DoorKing, Elite, and Mighty Mule, so the right fix happens on the first visit regardless of what’s on your driveway. We don’t claim a local parts warehouse; instead we source what’s needed and turn jobs around quickly. In Anthem and Green Valley especially, that speed matters when an HOA deadline is ticking. Call (855) 928-1304 and tell us what’s on your gate; we’ll tell you what it takes.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Parts & Welding Problems We See in Henderson Homes

  • Builder-grade operators on gates that were built manual. In newer subdivisions, an operator is often added to a manual swing gate without the power or conduit to run it properly, so the motor overloads and burns out early. The gate itself may be fine; the install is what failed.
  • Missing or undersized power and conduit runs. This is the big one in Henderson’s master-planned communities. Without a dedicated circuit and proper conduit buried at the build stage, voltage drops, the gate runs intermittently, and the motor takes the damage.
  • HOA deadline repairs. Leaning or faded gates draw violation letters, and homeowners need a fast, code-compliant fix in the community’s approved color. We match the palette and get the gate back in line before the deadline.
  • Dust-coated sensors and worn pivots. Blown desert grit coats photoelectric safety sensors until they fail and grit works into pivot hinges until the gate binds. A worn hinge looks like a motor problem but usually isn’t.

Pricing for Gate Parts & Welding in Henderson, NV

Henderson’s market runs a lot like the rest of the Valley, but HOA-driven jobs add a bit of finish work. A typical hinge replacement in Henderson runs $180 – $360, depending on the gate’s weight and count. Post replacement generally runs $350 – $750 when a new post is set to proper depth. Rail repair and minor welding land around $150 – $400. Custom welding to match an HOA-approved style runs $250 – $900 or more for larger sections. If your gate also needs a power and conduit run for automation, that’s separate electrical work and gets its own line on the quote. We give you a free estimate and settle the price with you before any work starts.

We Also Serve Cities Near Henderson

We also take calls from Boulder City, Whitney, Paradise, and Enterprise. The same metalwork and parts service we bring to Henderson applies across those nearby towns, and the quotes are the same square deal. If you’re not sure whether your address is covered, call (855) 928-1304 and we’ll tell you straight.

Serving Henderson, NV – Our Local Coverage Area

We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Henderson

Why Henderson Chooses Ironworks Gate Co. Whitney

We set the standard for gate parts & welding in Henderson.

30-60 Min Response

Fast dispatch across Henderson. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Henderson

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Henderson - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Henderson Customers Say

Trusted by homeowners across Henderson and surrounding areas.

★★★★★

"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."

Carrie Mercer
★★★★★

"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."

Jamal Dawson
★★★★★

"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."

Devon Ingram

Ready for Gate Parts & Welding in Henderson?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Henderson.

(855) 928-1304

Request a Free Estimate in Henderson

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch