Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Boulder City, NV
We provide independent Ghost Controls gate repair across Boulder City, NV, covering the 89005 and 89006 ZIP codes. The one thing that sets our Ghost Controls work here apart from anywhere else nearby: on this town’s historic lots, a stalling swing arm is usually a cracked masonry pillar throwing the operator out of alignment, not a dead control board. We diagnose the whole gate, post and operator together. Call (855) 928-1304 and a live person picks up, day or night.
Why Boulder City Residents Choose Us for Ghost Controls Service
Ghost Controls operators are open-loop, solar-ready swing systems, and we work on them every week. We know the TSS1 single-swing and TDS2 dual-swing arms, the TSX solar-efficient line and the tubular actuator kits well enough to tell a tired battery from a bad limit switch before we touch a bolt. That matters in a town where so many gates hang from posts poured decades ago.
We’re an independent Ghost Controls service provider, not manufacturer-affiliated or authorized, so we answer to you and nobody else. We carry OEM-compatible control boards, receivers and actuators for the job, plus quality aftermarket batteries and solar panels when that’s the smarter spend. Every Boulder City job settles on an upfront price before we turn a bolt, and it’s protected by our written 90-Day Done Right Promise. Whether you have a TSS1 or a TDS2, our technicians bring up to 13 years of experience to the driveway. That’s Ghost Controls service done right, and backed in writing.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Boulder City
- Battery and solar-charge degradation. Ghost Controls runs on a 12V battery that bakes under Boulder City’s 100°F+ summers and hard UV. West-facing gates go first, and you’ll notice low-voltage faults, remotes that quit and mid-cycle stalls before you notice anything else.
- Control-board and receiver failures after monsoon storms. Power surges and lightning near the Lake Mead corridor can leave remotes and keypads dead while the arm still swings by hand. We test the board and receiver before we replace either.
- Actuator arm and limit-switch drift. On swing gates hung from settled or cracked masonry pillars, the arm over-travels or binds, and the limit switch slips out of range. We fix the post and hinge plate, then re-calibrate the actuator.
- Corroded hinge plates and mounting brackets. UV and flash-flood moisture loosen the original wood and steel posts on old driveway gates. Rusted brackets follow, and the gate starts to sag against the arm.
- Hinge and post repair. When the footing itself has moved on Boulder City’s shrinking and expanding desert clay, no amount of motor work will hold. We repair the post and footing so the operator has something solid to push against.
Ghost Controls Service in Boulder City: What Local Conditions Mean for Your Equipment
Here’s a fact that shapes every Ghost Controls job we touch in Boulder City: the historic core near Nevada Way and Arizona Street was master-planned by the Bureau of Reclamation for Hoover Dam workers starting in 1931, and those 1930s and ’40s government-built bungalows came with short, narrow driveways. That means many Ghost Controls swing arms in town are bolted to original masonry or stucco pillars, not modern posts. So when a Boulder City homeowner calls about a “motor problem,” what we often find is a pillar that has cracked or shifted with the desert clay and thrown the arm and limit switch out of alignment. A typical job starts with a dual-swing operator stalling halfway open; a qualified pro finds the original pillar has moved, repairs the footing and hinge plate, then re-calibrates the actuator. The fix is post-and-footing work, then a battery and board check, not a whole new operator.
Ghost Controls Models & Products We Service in Boulder City
We service the Ghost Controls Heavy-Duty Single Swing TSS1 series, the Dual Swing TDS2 series, the Solar-Efficient TSX line and the tubular arm and linear actuator swing kits. When the housing and arm geometry are sound, we fit Ghost Controls OEM control boards, receivers and actuators. For batteries and solar panels, we use quality aftermarket replacements when they save you real money without cutting life short. We don’t claim any local parts stock. Parts are ordered and matched to your exact model before the visit, so the correct fix gets made the first time.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Boulder City
Every price is quoted and agreed before any work starts, so there’s no surprise on the bill.
- Battery or solar-panel replacement: typically $180 to $320, parts included.
- Control-board or receiver repair: $220 to $420 depending on model and access.
- Actuator arm, limit-switch and calibration: $200 to $380.
- Hinge plate, bracket and post or footing repair: $250 to $650, and often the real cure.
- Full operator replacement: $700 to $1,400 when the arm or housing is heat-warped.
A free estimate includes a full inspection of the gate, post and operator, a written price, and a straight answer on repair versus replace. Standing offers apply: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and 5% off for seniors and veterans. Call (855) 928-1304 for an exact quote. Estimates are free.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Boulder City
Afternoon stalls point to a battery losing voltage as the day heats up, made worse when a settled post is already loading the arm. Have the battery, solar charge and post checked together. Call (855) 928-1304 and we’ll come look.
It’s usually the receiver or its antenna on an older install, though a loose mounting bracket can do it too. We test the receiver first, then the post and bracket, so you’re not paying to replace the wrong part.
Often yes, but only after the pillar and footing are checked for cracks and settling. If the masonry has shifted, we repair the footing before mounting, or the arm will never hold calibration.
It can. Boulder City’s washes and flash flooding undermine old posts in a way paved Las Vegas lots don’t see, so monsoon damage here tends to show up in the footing and hinge plates, not just the board.
Repair the board when the housing and arm are sound; replace the operator only when the arm or housing is heat-warped or the footing is gone. A free estimate gives you a written answer both ways. Call (855) 928-1304 for that quote.
Service Areas Near Boulder City
We cover Boulder City and the communities around it, including Whitney, Henderson, Sunrise Manor, Paradise and Enterprise. If you’re just outside the 89005 or 89006 lines, ask and we’ll confirm coverage.
Our Boulder City service area reaches the historic core and the surrounding neighborhoods, and we also work throughout Henderson and Whitney on the same Ghost Controls systems.
Book Your Ghost Controls Service in Boulder City Today
Call (855) 928-1304 for independent Ghost Controls service in Boulder City. A live person answers 24 hours a day, every day. Most repair jobs are done same-day, and every one is backed in writing. We’ll be there when we say.
Written by the team at Ironworks Gate Co.