Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Access Control Across Sunrise Manor
If your driveway gate in Sunrise Manor has stopped answering the keypad, or the remote works only when you’re standing right at the fence, we can help. We handle Gate Access Control across the 89110 corridor and the wide lots off Boulder Highway, where blocks and long side yards mean gates run on operators, not a garden latch. Most jobs are completed in a single visit, and a live person answers the phone 24 hours a day. Call (855) 928-1304 and we’ll set a time.
Why Ironworks Gate Co. Whitney Is Sunrise Manor’s Preferred Gate Access Control Company
Sunrise Manor has a specific challenge most crews don’t plan for: power. Lots here are larger than average, driveways run long, and the gate sits far from the house. Running mains out to a distant operator is often impractical, so we lean on solar-powered operators and heavy-duty units built for wide sliding and double-swing gates. Our technicians have up to 13 years of experience and are trained on nine gate-automation brands, so whatever is on your driveway, we know how it fails.
We also know the paperwork. Sunrise Manor is unincorporated Clark County, not City of Las Vegas, so driveway and side-yard gate work is documented under county permit and right-of-way rules. That’s not a technicality. It’s the difference between a job that passes and one that has to be torn out. We confirm what’s required before anyone touches the operator. The price is quoted and agreed before the first bolt is turned, and every job is backed by our written 90-Day Done Right Promise.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Access Control Services in Sunrise Manor
These are gate access control, not locksmith work. Every job starts with the gate itself: posts, hinges, alignment. An operator on a sagging gate will fail no matter how good the electronics.
Keypad Entry
Keypads on Sunrise Manor gates take a beating. UV cracks the housing and dust works into the buttons. We replace and repro vision keypads on DoorKing and LiftMaster units, wire them properly, and set the codes so the gate only opens for who you intend.

Remote Control
If your remote stopped reaching from the driveway apron, the operator’s receiver or antenna is usually the culprit. We test range, replace worn receivers, and re-pair remotes on the brands already on your gate. No unnecessary parts.

Safety Photocell and Video Intercom
Nevada requires entrapment protection on automatic gates, and a photocell that trips for no reason is a safety device working as intended but set wrong. We realign, replace, and test. For anyone who wants to see who’s at the gate, we also install video intercoms.

Card Reader
Card readers make sense on shared driveways and properties with regular visitors. We install and service readers compatible with the operator’s control board, keeping the system simple and easy to manage.
Trusted Brands We Service in Sunrise Manor
We’re trained and equipped on nine gate-automation brands, including Ghost Controls, DoorKing, Elite, and Mighty Mule, and we service the rest of the major names on the market. We don’t claim to stock parts locally. When a board or motor needs replacing, we source it and come back with the right part rather than jury-rigging what’s already there. Solar operators are our specialty on the long driveways around Sunrise Manor, where mains power simply isn’t practical.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Access Control Problems We See in Sunrise Manor Homes
- Heat-fried operator boards. Summer highs routinely hit 105°F+, and it bakes control boards and cracks housings. The keypad powers up and the remote lights the gate, but nothing moves.
- Monsoon dust and runoff. Dust strips paint and jams rollers on block-wall slide gates. Runoff in unpaved side yards shifts posts and undermines footings.
- Sagging original gates. Corroded hinges on 1950s – 1980s driveway gates throw swing arms and rack and pinion out of alignment, so the safety photocell trips and the gate reverses mid-travel.
- Caliche underfoot. New post footings are a fight. Contractors hit caliche within a foot of the surface and need a breaker bar, not just a shovel.
Pricing for Gate Access Control in Sunrise Manor, NV
A typical keypad replacement in Sunrise Manor runs $180 – $340 installed. Remote receiver or re-pairing work is usually $95 – $225. A safety photocell pair, realigned and tested, is $120 – $260. Video intercoms, because they need wiring and network setup, run $450 – $900. Solar operator work and wide farm-gate operators price higher, often $1,600 – $4,200, because of the heavy-duty hardware and underground work involved. What moves the number: whether the gate sags (post and hinge work first), whether mains power is available, and what permits Clark County requires. The price is quoted and agreed before any work starts, with no surprises on the bill. Current offers include $50 off any repair over $250, free second opinion on any written estimate, an $89 seasonal tune-up, and a standing 5% senior and veteran discount. Call (855) 928-1304 for a free estimate.
We Also Serve Cities Near Sunrise Manor
We work across the east valley, including Whitney, Winchester, Las Vegas, and North Las Vegas. If your gate is close by, Sunrise Manor is a short drive from these areas and our Gate Access Control team covers them all. Same crew, same standards.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Access Control in Sunrise Manor
Yes. Nevada law requires entrapment protection on automatic gates. A functioning photocell or loop detector isn’t optional. If yours has been bypassed, we’ll restore it and test it before re-commissioning anything else. Call (855) 928-1304 for a free estimate.
The operator’s control board or receiver is baking in the 105°F+ heat and UV. Keypads and remotes usually still power up fine. The failure is in the operator housing, not the access device. We diagnose the board and decide whether it needs a shield, relocation, or a new control. Call (855) 928-1304.
Yes, and on many Sunrise Manor properties it’s the right answer. Solar operators with heavy-duty cycles handle wide sliding and double-swing gates on long driveways where trenching for mains power would be costly. We size the panel and battery to the gate’s weight and daily cycle count.
On a wide double-swing or sliding gate, the problem is usually the hinge post or footing, not the panel or operator. Monsoon runoff shifts posts, and sag throws the swing arm alignment out. Fix the post and wheel first, and the operator often doesn’t need replacing at all.
It depends on the work. Simple electronic swaps often don’t require a permit. Structural post, footing, or operator installation changes typically fall under Clark County code because Sunrise Manor is unincorporated. We confirm what’s required before work starts, so nothing gets torn out later.
Written by the team at Ironworks Gate Co.
Call (855) 928-1304 for a free estimate on any gate access control work in Sunrise Manor. We’ll come out, look at the gate, tell you what it needs, and quote a price before anything gets touched. Done right, and backed in writing.