A Ironworks company - serving Whitney, NV

Mighty Mule Gate Repair in Sunrise Manor, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Mighty Mule Gate Repair in Sunrise Manor, NV

We provide independent Mighty Mule gate repair across Sunrise Manor, NV, and we work on the operator itself – control board, limit switches, battery charging, arm geometry – before anyone suggests replacing it. What makes our Mighty Mule work different here is that most Sunrise Manor gates are wide driveway and side-yard units on old posts in hard caliche, so the fix usually starts with the gate and the footing, not the box. We’re Ironworks Gate Co. Whitney, an independent Mighty Mule repair shop serving the 89110 corridor. Reach us any hour at (855) 928-1304.

Call (855) 928-1304

Why Sunrise Manor Residents Choose Us for Mighty Mule Service

Mighty Mule is a do-it-yourself brand by reputation, which means a lot of the FM and MM swing units in Sunrise Manor were installed by a homeowner or a handyman and have never been properly set up. We know these operators cold: the FM350, FM500, and FM600 swing arms, the newer MM360, MM560, and MM572, the R4500 and R4500S slide openers, and the FM132 and FM134 keypad and remote accessories that pair with them.

We’re an independent shop. We aren’t affiliated with or authorized by the manufacturer, and that’s the point. We troubleshoot what’s actually failing instead of selling a new unit by default. Most Mighty Mule repairs we see in Sunrise Manor finish in a single visit, and the price is settled before a single bolt is turned. Every job carries our written 90-Day Done Right Promise. Nine brands on the truck, so whatever is on your driveway gets the correct fix the first time.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Common Mighty Mule Gate Repair Problems We Solve in Sunrise Manor

  • Control board and battery-charging failures. Solar and low-voltage Mighty Mule swing units live hard here. Summer highs that push past 105°F bake the battery and the enclosure until the charge won’t hold and the board drops out. We test charging voltage before we condemn anything.
  • Limit-switch and arm-position drift. On FM and MM swing arms, monsoon dust and wind load push a worn gate leaf out of plumb, and the limit switch no longer matches the leaf’s true travel. The gate opens partway and stops. That’s geometry, not always the board.
  • Slide-opener roller and track binding on R4500 units. The same wind-driven dust that strips paint off block-wall driveway gates packs into the track and rollers. Grit in the track will stall a healthy motor.
  • Corroded hinge and post hardware. Original wrought-iron and chain-link driveway gates have hinges that rust solid, which overloads the operator and trips its obstruction sensing. The operator gets blamed for a gate that won’t swing freely.
  • Post shift in caliche. Monsoon runoff in unpaved side yards undermines footings, and a sagging post throws off every arm adjustment downstream of it.

Mighty Mule Service in Sunrise Manor: What Local Conditions Mean for Your Equipment

Sunrise Manor is unincorporated Clark County, not City of Las Vegas, and that changes the paperwork on driveway and fence gate work here before any hardware gets touched. Repair work follows county codes, which matters when a post or footing repair needs to be documented. Then there’s the ground itself. The hard caliche that often sits within a foot of the surface means setting a new gate post along the Boulder Highway corridor can turn into a breaker-bar job long before a Mighty Mule arm gets re-hung. We plan for that. A footing repair that reads as an hour on paper can run longer in this soil, and we’d rather tell you that upfront than surprise you on the bill. Most lots out here are larger-than-average parcels with wide sliding and double-swing driveway gates and RV side-yard gates. Those heavy leaves are harder on a Mighty Mule operator than the small ornamental gates of newer master-planned communities, and the equipment shows it.

Mighty Mule Models & Products We Service in Sunrise Manor

We service the full Mighty Mule swing line – FM350, FM500, FM600, and the MM360, MM560, MM572 – along with the R4500 and R4500S slide openers and the FM132 and FM134 keypad and remote accessories. On parts, we favor Mighty Mule OEM control boards, arms, and limit switches where the unit is current. For batteries, rollers, and keypads, proven aftermarket parts do the job without adding cost that buys you nothing. We don’t claim to stock parts locally; we source what each job needs. On older boards with obsolete components, we’ll tell you honestly when a new operator is the better spend than chasing discontinued parts.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Mighty Mule Service Pricing in Sunrise Manor

Mighty Mule repair pricing in Sunrise Manor runs from about $150 for a battery and charging-system service to $300 – $550 for a control board replacement, depending on the model. Slide-opener roller and track work on an R4500 typically lands between $180 and $350. Post and hinge realignment on a heavy driveway gate, with the caliche factor, runs $200 – $500 and up depending on how deep the footing fight goes. A free estimate includes a full check of the operator, the gate’s swing or slide, and the charging system, with the price written and agreed before work starts. Call (855) 928-1304 for an exact quote.

Serving Sunrise Manor, NV – Our Local Coverage Area

We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Mighty Mule Gate Repair in Sunrise Manor

Service Areas Near Sunrise Manor

We also serve homeowners in Whitney, Winchester, Paradise, Henderson, and Enterprise. If you’re on the east side of the valley, we cover your Mighty Mule service. See our full Sunrise Manor service area page, and learn more about our Mighty Mule service.

Book Your Mighty Mule Service in Sunrise Manor Today

Call (855) 928-1304 for a free estimate. We’re available 24 hours a day, seven days a week, and same-day service is often possible for a gate that’s stuck open or won’t close. Our technicians have up to 13 years of experience, and every job is backed by our written 90-Day Done Right Promise.

Written by the team at Ironworks Gate Co.

Need Gate Repair help in Sunrise Manor? Licensed & insured · 1-hour response · free estimates
Call (855) 928-1304
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Ironworks Gate Co. Whitney responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch