Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Las Vegas
If your gate drags, binds at the latch, or has a hinge that’s pulled loose from the post, we can help. Ironworks Gate Co. Whitney handles gate parts and welding across Las Vegas, from hinge and post replacement to rail repair and custom fabrication on the frame you already have. We know this valley’s gates: the northwest tract homes off the 215 and the older stucco properties closer in are two different jobs, and we treat them that way. Most repairs are finished in a single visit, and the price is settled before we touch a bolt. Call (855) 928-1304 and a live person will pick up, day or night.
Why Ironworks Gate Co. Whitney Is Las Vegas’s Preferred Gate Parts & Welding Company
We’re the gate specialist, not the generalist. Ironworks Gate Co. Whitney works only on driveway and estate gates, which means the welds, the hinges, and the operator on your driveway are the whole job rather than a side errand. Las Vegas homeowners call back for the same reason: we’re trained and equipped across nine gate-automation brands, including Ghost Controls, DoorKing, Elite, and Mighty Mule, so the correct fix happens on the first visit instead of the third. Our technicians bring up to 13 years of experience and treat a 40-year-old steel gate with the same care a new install gets.
Every call reaches a live person, 24 hours a day, seven days a week. No voicemail tree, no waiting until Monday. Every job is covered by our written 90-Day Done Right Promise: if it isn’t right, we come back and make it right, no paperwork and no arguing. Our technicians are background-checked and uniformed, working in your yard the way they’d work in their own mother’s. That’s what we call the Keystone Standard, and it applies on every job, the 400th as much as the first.
We know which gate problems show up in Las Vegas and why. In the northwest valley, most gates hang from stucco-clad block walls on tract homes built through the 1990s and 2000s, and a lot of them are rust-prone steel frames set right into caliche-hardened soil. Older properties closer in use wood frames that dry out and split in our low humidity. That local knowledge shortens the visit and keeps the repair honest.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Las Vegas
Hinge Replacement
Galvanized hinges on steel frames seize after a few Las Vegas summers, and no amount of spray lubricant saves a pin that’s already worn past its tolerance. We replace them with adjustable hinges that let the gate absorb the seasonal swing between cool winter mornings and a frame that’s expanded at 110°F. That’s the fix that lasts, not the one that gets you through to fall.

Post Replacement
A hinge post that’s heaved out of the ground is the most common reason a gate drags in Las Vegas. We re-set the footing with a proper concrete collar and check it against the region’s expansive clay, which swells after monsoon rain and moves the whole gate out of plumb. In the tract homes across ZIP codes 89129 and 89149, post re-set is routine by July. This is our bread and butter, and it’s where a cheap patch will fail you twice.

Rail Repair
Rails take the brunt of the sun, and paint that’s broken down after years of UV leaves steel bare and rusting from the inside out. We cut out the rusted section and weld in new rail rather than covering it with filler. On the older wood-frame properties in and around ZIP 89108, we repair splitting and checking at the rail ends. You keep the original craftsmanship and the gate closes clean again.

Custom Welding
Sometimes the right answer is a piece that doesn’t exist on a shelf. We fabricate brackets, hinge plates, gussets, and latch stops to fit your gate frame and its operator, welded on site to spec. If an older gate has been repaired three different ways over the years, we can rebuild the joint so it moves the way it was designed to.
See the full scope of our Gate Parts & Welding work if you want the whole picture, from hinges and welds through to keypads and automation.
Trusted Brands We Service in Las Vegas
We’re certified to service nine leading gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t stock parts on a truck or keep a warehouse here; what we bring is the right diagnosis and a fast turnaround on the parts your gate actually needs. That matters most with legacy operators, where a discontinued control board has to be matched to a modern replacement or retired outright. Whatever brand is on your driveway, the goal is the same: get it operating correctly and safely.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Las Vegas Homes
- Hinge post heave after monsoon rain. Expansive clay under the footing swells in July through September, and the post tilts. By mid-summer the gate drags on the ground even though it swung free in February.
- Seized galvanized hinges on rust-prone steel frames. A hinge that no longer pivots smoothly after several summers puts stress on the whole gate, and the pin eventually shears.
- Obsolete control boards in older operators. A board from the 1990s often can’t be fitted with modern safety photocells, which forces an honest repair-or-replace decision.
- Paint and finish breakdown from year-round UV. Sun bakes the coating off steel and plastic, and bare metal starts to rust where you can’t see it.
Here’s the pattern we see across the northwest valley: a homeowner notices the swing gate dragging on the ground or binding at the latch by mid-summer, even though it worked fine all winter. The usual cause is a hinge post that has heaved in the clay combined with a steel frame that’s expanded in the heat, throwing the gate out of plumb. A qualified pro will re-set the post footing with a concrete collar, swap the seized hinges for adjustable ones, and confirm the gate operator still lines up with the new geometry, rather than forcing the panel back into place. That measured approach is the whole difference between a repair that holds and one that fails by the next heat wave.
Pricing for Gate Parts & Welding in Las Vegas, NV
A typical hinge replacement in Las Vegas runs $150 to $320 per hinge, and a post re-set with a proper concrete collar runs $350 to $900 depending on soil and depth. Rail repair and small custom welding jobs usually land between $180 and $550, and the diagnosis is included in the estimate. What moves the price is the condition of the frame, whether the post has to come fully out, and whether the gate operator needs re-alignment afterward. We quote the price and agree on it with you before any work starts, so the bill matches what you were told. Estimates are free, senior and veteran customers take 5% off, and we knock $50 off any repair over $250.
We Also Serve Cities Near Las Vegas
We cover the neighborhoods around Las Vegas too. If you’re in Winchester, North Las Vegas, Sunrise Manor, or Paradise, the same crew and the same guarantee come to you. Gate Parts & Welding in Las Vegas is the hub for the whole area, so start there if you’re not sure whether your address is in range.
Serving Las Vegas, NV – Our Local Coverage Area
We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Las Vegas
Lifting the hinges hides the symptom but leaves the real cause in place: a hinge post heaving in the clay plus a steel frame expanding in the heat. A quick lift buys you a few weeks, then the gate drags again by the next hot spell. The durable fix is a post re-set and adjustable hinges that absorb both movements.
Yes. We weld new hinge plates directly onto a sound steel frame, on site, to fit the gate’s weight and swing. If the frame is rusted through at the joint, we cut out the weak section and build it back before hanging the hinge. Call (855) 928-1304 for a free estimate on yours.
Sometimes, but not always. Many older control boards have no input for modern safety photocells and can’t be updated safely, which makes replacement the right call. We check the board and tell you plainly whether a retrofit is possible. If it isn’t, we quote a replacement before any work begins.
Monsoon moisture swells the expansive clay under the post and shifts the gate, so the latch and strike plate no longer meet. The alignment drifts because the ground is moving. We re-set the footing and align the latch to the corrected geometry, and adding an adjustable latch helps it take the next wet season in stride.
It depends on how much of the gate is sound. If the frame, posts, and operator are solid, a repair that adds adjustable hinges and modern safety photocells is usually the cheaper path. If the operator is obsolete and the frame is rusted at the joints, replacement often costs less over a few years than repeated patches.
If you have a gate problem in Las Vegas, call (855) 928-1304 for a free estimate. Ironworks Gate Co. Whitney answers every call live, 24 hours a day, seven days a week, and stands behind every job with our written 90-Day Done Right Promise.
Written by the team at Ironworks Gate Co. Whitney.