Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Enterprise
Enterprise gates take a beating that flat-lot tract homes elsewhere in the valley never see, and the fix isn’t always where it looks. We’re Ironworks Gate Co. Whitney, and on the slope-side lots around Southern Highlands, a dragging or balky gate is often a post-footing problem, not a hinge problem. If your ornamental or driveway gate is sagging, scraping the block wall, or refusing to latch, call us at (855) 928-1304. We work Enterprise regularly, we know the HOA styles and the expansive soil that moves them, and a live person answers every call, day or night. A repair that keeps your gate swinging clean and your architectural review off your back starts with the right diagnosis, done right, backed in writing.
Why Ironworks Gate Co. Whitney Is Enterprise’s Preferred Gate Parts & Welding Company
Enterprise homeowners are particular about their gates, and they should be. The decorative metal and bespoke ironwork common around Southern Highlands is not the same job as a standard side-yard gate, and we approach it that way. Our technicians have up to 13 years of experience, and every one is background-checked, uniformed, and guided by our K.E.Y.S. values, so the 400th gate on the block gets the same care as the first. We stand behind every job with the 90-Day Done Right Promise, a written guarantee with no arguing, no exceptions. If it isn’t right, we come back and make it right.
We’re trained and equipped on nine gate-automation brands, including DoorKing, Elite, and Mighty Mule, so the correct fix gets made on the first visit. That matters more on a custom ornamental gate than on a stock one. When a heavy bespoke panel needs welding, re-truing, and an operator re-verified, we’d rather get the whole job onto one visit than send you chasing three separate trades.
Response to Enterprise is prompt, and we schedule around your day. Most parts-and-welding jobs are sorted in a single visit, with the price agreed upfront before a single bolt is turned. Get a free second opinion on any written estimate, and current customers can take $50 off any repair over $250. Senior and veteran customers always get our 5% discount.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Enterprise
Post Replacement
When a gate stops latching or drags against the block wall in Enterprise’s planned communities, the hinge post is where we look first. Steel and iron posts anchor into soil that expands and contracts with the seasons, and a settling pier can pull a sound post out of plumb. We reset or replace the post, re-anchor it at the footing, and re-hang the gate so it swings true again.

Hinge Replacement
Baked finishes and dry bearings make hinges bind long before they fail outright, especially on ornate gates that face the sun all day. We match hinge hardware to the panel’s weight and style so the repair doesn’t telegraph through the gate. For a heavy ornamental swing gate, a properly matched hinge is what keeps the swing silent for years.

Rail Repair
A bent rail or a rail that has pulled from its weld is common on lighter gates after a monsoon gust or a nudge from a vehicle. Straightening and re-welding restores the structure without pulling the whole panel. We check the rail line against the post and footing so the repair doesn’t just mask a movement issue.

Custom Welding
Enterprise’s custom estates carry ornamental ironwork that off-the-shelf parts can’t match. When a picket, scroll, or frame member cracks, we weld and dress it to blend with the surrounding finish, keeping the look your architectural review expects. Gate rollers, latch and lock work rounds out the parts side, from track rollers that have packed with dust to latches that no longer align with a shifting post.
For the full scope of parts and fabrication work, our Gate Parts & Welding team handles everything from a worn roller to a re-welded rail.
Trusted Brands We Service in Enterprise
We service the automation brands that drive Enterprise driveways: DoorKing and Elite for the entry systems, plus Mighty Mule and Ghost Controls on residential swings, alongside the rest of the nine brands we’re trained on. We don’t claim to stock parts locally. What we do claim is the right diagnosis and a fast turnaround, because we know the correct fix and order what’s needed rather than guessing on your driveway. On operator-driven gates, we also verify entrapment protection is working, standard practice under UL 325 whether your gate was automated years ago or just last season. A parts-and-welding repair that leaves the operator unchecked isn’t finished.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Enterprise Homes
- Baked finishes and dried bearings. Blistering UV and summer heat bake the finish and dry out the bearings on ornate metal gates, so swing gates turn stiff and noisy. A finish-and-lubrication pass paired with a hardware check settles most of it.
- Dust in the moving parts. Blowing dust packs into track and swing hardware, hinge points, rollers, and latches, wearing them faster than rain ever would. Regular cleaning and re-greasing keeps deployment smooth.
- Piers and hinge posts that move. On slope-side Southern Highlands lots, the expansive desert soil shifts block walls and piers, so a gate sags even though the hinges are sound. The real fix lives at the footing, not the pin.
- Monsoon-bent panels. The occasional wind event bends lighter gates, and a bent rail or picket needs straightening and re-welding rather than a whole-panel replacement.
Here’s the local picture in practice: in Enterprise’s newer stucco-and-tile planned communities, a wrought-iron swing gate commonly begins to sag and scrape because the hinge post has crept or the footing has shifted, not because the hinges are worn. A qualified local pro checks the hinge post and footing first, then performs a sag correction with hinge or post replacement as needed, re-trues and re-hangs the panel so it clears the block wall, and, on operator-driven driveways, verifies the entrapment protection is working per UL 325. The diagnosis is what keeps a repair from being a band-aid. That slope-side, HOA-governed reality is why a simple hinge swap elsewhere in the valley becomes a matching and geometry job in Enterprise.
Pricing for Gate Parts & Welding in Enterprise, NV
Gate parts and welding work in Enterprise runs roughly $180 to $480 for most jobs, with the exact figure set by what the gate needs. A typical hinge replacement in Enterprise runs $150 to $280; post replacement generally runs $350 to $700 depending on footing work; rail repair and small weld jobs run $120 to $350; and custom fabrication is quoted per piece. Heavy ornamental panels, deeper footing work on moving piers, and matched finishes push toward the higher end. We give you an upfront price agreed before any work starts, so there’s no surprise on the bill. Call (855) 928-1304 for a free estimate, and ask about $50 off any repair over $250, the $89 seasonal tune-up, and our standing senior and veteran discount.
We Also Serve Cities Near Enterprise
We handle Gate Parts & Welding in Enterprise and the surrounding communities we know well: Spring Valley, Paradise, Winchester, and Henderson are all within easy reach. If you’re just over the line in a neighboring community and your gate needs welding or a new post, give us a call and we’ll sort out timing. The same upfront pricing and written guarantee come along to every one of them.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Enterprise
It’s usually the post, not the hinges. On Enterprise’s slope-side lots, expansive desert soil moves the block wall and footing, so a gate sags and scrapes even when the hinge hardware is sound; a qualified pro checks the hinge post and footing first, then corrects the sag at the post. Call (855) 928-1304 for a free estimate and we’ll tell you which it is.
Yes, and matching the style is part of the job in Enterprise, not an afterthought. Repairs here are as much about color, style, and swing geometry as about the hardware, so the gate stays within your architectural review standard. Call us for a free estimate and to look at what your HOA requires.
Yes. Automated driveway gates in Enterprise should have working entrapment protection (photo-eyes or edge sensors) per UL 325, and we check it as part of an operator-driven repair. If yours was automated years ago and never checked, that’s worth a look. Call (855) 928-1304 to schedule an estimate.
Heat and UV bake the finish and dry out the bearings, while blowing dust packs into hinge points and rollers, so the gate stiffens and squeals. Cleaning and re-greasing the moving parts, plus a hardware check, settles most of it. Call us for a free estimate before small stiffness turns into a broken hinge.
Usually, yes. A bent rail or cracked picket can often be straightened, welded, and dressed to match the surrounding ironwork, which preserves a custom gate instead of replacing it. Call (855) 928-1304 for a free estimate and we’ll tell you whether welding or replacement is the square deal.
If your Enterprise gate is dragging, sagging, noisy, or just not swinging the way it should, call Ironworks Gate Co. Whitney at (855) 928-1304 for a free estimate. Our technicians have up to 13 years of experience, every job comes with upfront pricing and the written 90-Day Done Right Promise, and a live person answers whenever you call. Done right, and backed in writing.
Written by the team at Ironworks Gate Co. Whitney.