Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHinge & Post Repair in Whitney, NV
Hinge and post repair in Whitney, NV typically runs $185 to $420 for a standard residential driveway gate, and most jobs are finished in a single visit. When a gate post shifts, a hinge pin wears through, or a weld cracks at the frame, the whole gate starts to sag, scrape, and eventually refuse to latch. We repair and re-hang gate posts and hinges so the gate closes square again, and we settle the price with you before a single bolt is turned.
Ironworks Gate Co. Whitney handles this work as part of our full Gate Repair service across the east Las Vegas Valley. Our technicians have up to 13 years of experience, and we’re trained and equipped on the automation that hangs on these gates too, including LiftMaster and Ghost Controls systems, so if a sagging post has been dragging on your opener, we check that at the same time. Call (855) 928-1304 for a free estimate.
Key Takeaways
- Loose, leaning, or cracked gate posts are usually a soil and foundation problem as much as a metal problem, and we treat them that way.
- Most hinge and post repairs are completed in a single visit with upfront pricing agreed before work starts.
- Every job comes with our written 90-Day Done Right Promise.
- A live person answers the phone 24 hours a day, 7 days a week.
When You Need Hinge & Post Repair
Whitney sits on ground that shifts with the seasons, and that movement shows up first at the gate posts. The soil here expands and contracts with the summer heat and the odd winter freeze, and a post that was set perfectly straight a decade ago can work its way out of plumb. Here’s what homeowners call us about most often.
- The gate drags or scrapes on the driveway. A sagging hinge or a post that has kicked out of plumb drops the gate’s swing arc, and the bottom rail starts shaving the concrete. If you hear a scrape every time the gate opens, the hang is off.
- The gate won’t latch without a lift. When you have to grab the gate and heave it up to get the latch to catch, the hinge side has dropped. That’s a hang adjustment or a hinge rebuild, not a latch replacement.
- A post is leaning or has pulled away from the fence line. Wind, vehicle contact, or soil movement can rock a post loose. A leaning post that isn’t corrected puts stress on every weld and hinge above it.
- Rust and weld cracks at the hinge plates. The hinge mounting points are where moisture collects and where the load concentrates. Cracks at those welds are worth fixing before the gate drops.
- The opener is straining or reversing. A gate that has dropped even a half inch throws extra load onto the motor. A Mighty Mule or Elite operator that keeps reversing may be fighting a hinge problem, not a motor problem.
- Visible wobble under hand pressure. Push the gate firmly where the hinge attaches. If the post moves at the ground, the repair is at the post, not the hinge.
Our Hinge & Post Repair Process
We treat every hinge and post repair as a structural fix first and a cosmetic one second. Here’s how a typical visit goes.
- We inspect the full hang, not just the symptom. We check post plumb, hinge wear, weld integrity, and gate frame squareness, plus the operator and track if your gate is automated. A post that’s out of level by a fraction shows up as a swing problem at the far end of the gate.
- We quote the repair on the spot. You get an upfront price with no surprises on the bill. If we find the post footing is the real problem, we tell you that before we touch anything.
- We stabilize or reset the post. Depending on what we find, that may mean resetting the footing, bracing and re-plumbing the post, or repairing the post-to-frame connection. We confirm it’s plumb and solid before re-hanging the gate.
- We repair or replace the hinges. Worn pins and bushings get swapped, cracked hinge plates get re-welded, and we re-hang the gate to swing true with proper clearance at the ground.
- We test the swing and the automation. The gate gets cycled open and closed several times, and we check the operator’s force and limits so the motor isn’t working against a bad hang. If your DoorKing or Ghost Controls keypad or operator needs adjustment, we handle it in the same visit.
- We walk you through the fix and back it in writing. You see what was done, and the job is covered by our 90-Day Done Right Promise. If it isn’t right, we come back and make it right.
Hinge & Post Repair Pricing in Whitney
We give real ranges rather than a flat number because no two posts are the same underneath. Here’s what homeowners in Whitney generally see.
| Repair | Typical Range |
|---|---|
| Hinge adjustment or re-pin | $95 – $185 |
| Hinge replacement (one side) | $150 – $280 |
| Weld repair at hinge plate or frame | $165 – $320 |
| Post stabilization or re-plumbing | $220 – $480 |
| Post footing reset (one post) | $350 – $650 |
| Full hinge & post repair, both sides | $420 – $850 |
What moves the price: post type (steel, wood-wrapped, or masonry), footing condition, whether the gate needs to come off to reset the post, and whether the automation needs re-tuning afterward. Larger estate gates and dual-swing setups cost more than a single driveway leaf.
Two things help. We take $50 off any repair over $250, and there’s a permanent 5% Senior and Veteran discount. There’s also a Free Second Opinion on Any Written Estimate if you’ve already been quoted elsewhere. Estimates are free, so it costs nothing to find out where you stand. Call (855) 928-1304.
Why Whitney Gate Posts Fail
The east side of the valley gets hot, and the ground here does a lot of moving across the year. A post set in the 1990s may have been set into soil that’s since shifted, and the gap at the bottom of the gate is the first sign. We also see wind load on taller, decorative gates along open stretches of the neighborhood, where the gate catches more of the gust than the post footing was designed for. When we reset a post, we account for that load so the fix holds.
You can read more about the region and other repairs on our Gate Repair in Whitney page. If your driveway is in a neighboring part of the valley, the same hinge and post work is covered through our Henderson gate repair page and our North Las Vegas gate repair page.
How Much Does Hinge & Post Repair Cost in Whitney?
Most hinge and post repairs in Whitney run between $185 and $420, with footing resets at the higher end, up to about $650. The range depends on post condition, gate size, and whether the automation needs adjusting. We quote on site before any work begins, so there are no surprises. Call (855) 928-1304 for an exact quote – estimates are free.
FAQs – Hinge & Post Repair
Can you fix a leaning gate post without replacing it?
Often yes. If the post itself is sound, we can re-plumb and stabilize it in place with a reinforced footing, which is the more common fix. We only recommend replacement when the post is cracked, rusted through, or bent. The inspection tells us which it is.
How long does hinge and post repair take?
Most single-post or hinge jobs are finished in one visit of a few hours. A full footing reset on a large gate can take longer, and we’ll tell you the expected time when we quote. We never leave a gate half-hung.
Will repairing the post fix my gate opener that keeps reversing?
It may. A dropped or out-of-plumb gate loads the motor, and many operators trip their reversing safety on that extra force. Once the gate hangs true, the motor often behaves. If the operator itself needs service, we service nine brands, including LiftMaster and Ghost Controls, on the same visit.
Is it cheaper to repair the hinge or replace the whole gate?
Repair is almost always the better call. A gate frame and post in good shape doesn’t need replacing just because a hinge wore out. We only suggest replacement when the frame or post has failed structurally. Call (855) 928-1304 for a free second opinion on any estimate you’ve already got.
Do you offer a warranty on hinge and post repairs?
Yes. Every completed job is covered by our written 90-Day Done Right Promise. If something we repaired isn’t right, we come back and make it right, no arguing.
Can you come today?
We aim for same-day and next-day repair on most jobs, and a live person answers the phone 24 hours a day, 7 days a week. Call (855) 928-1304 to check today’s availability in Whitney.
When a gate hangs right, you stop thinking about it. That’s the standard we work to: the company that makes a 40-year-old gate close like the day it was hung. Ironworks Gate Co. Whitney is here for the hinge and post repair that gets you there, backed in writing, priced upfront, and done right the first time. Reach out to Ironworks Gate Co. and let’s get your gate swinging square again. Call (855) 928-1304 for a free estimate.
Written by the team at Ironworks Gate Co. Whitney, serving Whitney.