A Ironworks company - serving Whitney, NV
Gate Parts & Welding in Summerlin, NV | Ironworks Gate Co. Whitney

Gate Parts & Welding in Summerlin - Welded and Fitted, Priced Up Front

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Summerlin

If your gate has stopped latching, sagged off its post, or shown up dead at dusk, you’re in the right place. Ironworks Gate Co. Whitney handles gate parts and welding for Summerlin homeowners. We know the villages, we know the guard gates, and we know why gates out here fail the way they do. When a heavy swing gate or a builder-installed solar operator gives out, the fix should be measured, matched, and guaranteed in writing. Call us at (855) 928-1304 and a live person picks up, any hour of the day or night.

Call (855) 928-1304

Why Ironworks Gate Co. Whitney Is Summerlin’s Preferred Gate Parts & Welding Company

Summerlin gates are not like the gates in the older parts of the valley. Many driveway and courtyard gates in 89135 came in as original builder upgrades, often solar or low-voltage automated, and they were spec’d to a palette and a design the Summerlin Council already approved. That changes how parts get replaced. A hinge post, an arm, or a decorative panel has to match the original spec and the community’s approved colors, not whatever is in stock. Our technicians have up to 13 years of experience reading that spec before they touch the metal. We quote the price before the first bolt turns, and we back every job with the 90-Day Done Right Promise: if it isn’t right, we come back and make it right. Our crews live in these neighborhoods. When a gate in The Ridges won’t latch after a monsoon wind or a courtyard gate in Red Rock Country Club dies at dinnertime, the answer is usually the footing, not the panel.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Summerlin

Everything here is built around the way Summerlin gates actually wear. The desert decides much of it. The rest is the hardware the builder chose.

Hinge Replacement in Summerlin

Wrought-iron hinges take the load of the whole panel, and in Summerlin’s dry heat and blowing grit they wear faster than you’d expect. When a hinge binds or the welds crack, we replace the hinge with hardware matched to the gate’s material and the community’s approved finish. Rusted or frozen hinges get caught early on our seasonal tune-up. A drifting gate usually tells you it’s a hinge problem before the weld fails.

Hinge Replacement in Summerlin

Post Replacement in Summerlin

The hinge post is the anchor for everything. In dry desert soil it can work loose, and a heavy gate that has to latch at the same spot every night will soon stop latching. Replacing or re-setting a post means probing the ground, digging the footing deeper, and re-leveling the gate before re-hanging it. We do that work before we ever blame the gate operator, because it usually isn’t the operator’s fault.

Post Replacement in Summerlin

Rail Repair in Summerlin

Wide driveway gates load the top and bottom rails hardest, and UV-chalked powder coat lets moisture into the joints. We repair cracked or bowed rails, re-true the gate frame, and re-coat in a color matched to the Summerlin palette. On long-span rails, we check the entire run for flex, not just the broken section.

Rail Repair in Summerlin

Custom Welding in Summerlin

Sometimes the exact replacement part doesn’t exist. A solar operator bracket, a decorative ironwork panel, or a custom latch assembly may need to be fabricated on site. Our welders work with wrought iron, steel, and aluminum and match the finish to the community’s approved palette. If you’re weighing repair against a fresh fabrication, our Gate Parts & Welding team can walk you through the options and price both up front.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 928-1304

Trusted Brands We Service in Summerlin

We’re trained and equipped on nine gate-automation brands, so the correct fix gets made on the first visit, whatever is on your driveway. Solar and low-voltage operators are especially common in Summerlin’s guard-gated villages, and most of them are Linear, Viking, or Ghost Controls units that arrived as builder upgrades. We don’t promise stocked parts. What we do promise is a fast turnaround, a clear diagnosis, and hardware spec’d to the original installation and the community’s approved palette. Solar opener batteries and control boards are a frequent replacement on older Summerlin installs, and we handle those alongside the mechanical side of the gate.

Common Gate Parts & Welding Problems We See in Summerlin Homes

  • Solar openers dying at dusk. In a guard-gated village, a solar gate operator that quits at the end of the day is a security concern and an HOA problem. Regular 100°F+ summers cook the battery and control board faster than in milder climates.
  • Hinge post footings working loose in the desert soil. Heavy wrought-iron swing gates sag when the footing loses grip, and the panel stops latching at the same point every night. A gate that only latches when you lift it is a post problem.
  • Powder coat chalking and fading within a few years. Intense UV breaks down the finish quickly, and replacement parts must match the Summerlin Council’s approved color palette, so the fix is spec’d, not grabbed off the shelf.
  • Grit-fouled rollers and hinge pins. The dry, dusty air here works abrasive grit into every moving part. Seasonal cleaning and lubrication keeps the hardware moving smoothly and catches worn parts before they fail.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Gate Parts & Welding in Summerlin, NV

Pricing in Summerlin sits where the housing stock does: higher than in most surrounding Clark County neighborhoods, because the job often means matching an approved palette and a builder-installed spec rather than fitting whatever standard part is on the shelf. A typical hinge replacement in Summerlin runs $150 – $350. A hinge post re-set or replacement runs $350 – $850. Rail repair and small weld repairs run $120 – $400, and a builder-spec custom wrought-iron fabrication runs $500 – $1,800 depending on scope. Solar opener battery and board replacement runs $200 – $550 on most builder-installed units. Your written estimate is quoted and agreed before any work starts, so there are no surprises on the bill. Ask about $50 off any repair over $250 and our permanent 5% senior and veteran discount.

We Also Serve Cities Near Summerlin

We work Summerlin and the neighborhoods around it. If you’re just outside the master plan and don’t want to wait on a shop that only covers the strip, our team covers Summerlin and the surrounding communities, including Spring Valley, Las Vegas, Winchester, and Paradise. Same upfront pricing, same 90-Day Done Right Promise, same live phone line every day of the week.

Serving Summerlin, NV – Our Local Coverage Area

We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Summerlin

Get Your Summerlin Gate Repaired Right

Whether it’s a hinge post that has worked loose, a solar opener that won’t survive the summer, or a decorative panel that needs custom welding, Ironworks Gate Co. Whitney can help. Our technicians are background-checked and uniformed, our pricing is upfront and written, and every job is backed by the 90-Day Done Right Promise. Call (855) 928-1304 for a free estimate, any day, any hour.

Written by the team at Ironworks Gate Co.

Why Summerlin Chooses Ironworks Gate Co. Whitney

We set the standard for gate parts & welding in Summerlin.

30-60 Min Response

Fast dispatch across Summerlin. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Summerlin

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Summerlin - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Summerlin Customers Say

Trusted by homeowners across Summerlin and surrounding areas.

★★★★★

"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."

Carrie Mercer
★★★★★

"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."

Jamal Dawson
★★★★★

"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."

Devon Ingram

Ready for Gate Parts & Welding in Summerlin?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Summerlin.

(855) 928-1304

Request a Free Estimate in Summerlin

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch