A Ironworks company - serving Whitney, NV

Driveway Gate in Whitney, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Driveway Gate in Whitney, NV

A driveway gate in Whitney, NV is a swinging or sliding barrier that closes off your driveway, usually automated with a motor and keypad so you never have to leave the car to open it. Most Whitney homeowners who call us want one of three things: a new gate hung and wired correctly the first time, a tired gate that drags or won’t latch brought back to square, or an existing gate tied to a modern opener that actually works in our desert heat. We do all three.

Ironworks Gate Co. Whitney is a gate specialist, not a general handyman outfit. Our technicians have up to 13 years of experience, and they’re trained on the automation brands that show up on Whitney driveways – Ghost Controls, DoorKing, Elite, and Mighty Mule among them. When you call (855) 928-1304, a live person answers, day or night. The work falls under our broader Gate Installation service, and every finished job is covered by our written 90-Day Done Right Promise.

When You Need Driveway Gate

Gates don’t fail all at once. They give you warnings for months before they quit, and most of those warnings are easy to miss if you’re not looking. Here’s what Whitney homeowners describe when they call us:

  • The gate drags or scrapes on the concrete. In Whitney’s summer heat, gate posts and hinges move. A gate that cleared the driveway in March can be catching the slab by July, and every drag wears the hinges a little faster.
  • The opener strains, stalls, or reverses halfway. A motor fighting a sticking gate will eventually burn out. Catching it early is the difference between a hinge adjustment and a new operator.
  • The gate won’t latch or stay closed. Wind, settling, and worn latches all cause this. A gate that closes but doesn’t latch is the one we get called about most on older Whitney properties.
  • The keypad or remote stopped working. Sometimes it’s the battery. Sometimes it’s the receiver or the wiring. DoorKing and Elite systems both have specific failure points we’ve seen dozens of times.
  • The gate is rusted, sagging, or the weld has cracked. Desert sun is hard on paint and powder coat, and once rust starts at a weld, it spreads. We weld and repair on site rather than pushing a full replacement.
  • You want a gate where there isn’t one. New construction, a new fence line, or a driveway that’s been open for years and you’re ready to close it off. That’s the job we most enjoy.

Our Driveway Gate Process

Every driveway gate job follows the same steps, whether it’s a repair or a fresh install. No paperwork surprises, no price changes after the fact.

  1. We look at it in person and give you a written estimate. We check the posts, hinges, slab, and existing wiring before we quote anything. The price you get is the price you pay.
  2. We match the right hardware to your gate. A Mighty Mule operator is right for some driveways and wrong for others. We size the motor and the arms to the gate’s weight and swing, not the other way around.
  3. We repair or install, in a single visit where possible. Hinges, welds, posts, operators, keypads, safety sensors, and remotes get handled together. Most jobs finish the same day we start.
  4. We test it the way you’ll use it. Open, close, latch, reverse, keypad entry, remote range. We run the gate through a full cycle several times before we consider it done.
  5. We walk you through it and leave the paperwork. You get the written 90-Day Done Right Promise. If something isn’t right in those 90 days, we come back and make it right. No arguing.

If the job is part of a larger gate project, the same crew handles the whole scope. Our full Gate Installation in Whitney work covers everything from the first post to the last keypad code.

Driveway Gate Pricing in Whitney

Driveway gate pricing in Whitney, NV ranges from around $350 for a hinge-and-latch repair up to $6,500 or more for a full custom install with automation, depending on the gate size, material, and how much site work is involved. Repairs are usually a fraction of replacement, and we tell you honestly when repair is the better call.

Here’s what the line items typically look like:

Item Typical Range
Hinge, latch, or weld repair $350 – $750
Gate operator / motor replacement $850 – $2,200
Keypad, receiver, or remote repair $200 – $500
Safety sensors and photo-eye installation $300 – $600
New custom driveway gate install (with automation) $3,500 – $6,500+

What moves the number: gate weight (steel costs more than aluminum or wood), whether the posts need replacing, how far the wiring runs from the house to the gate, and whether the driveway slab needs cutting. None of those are guesswork for us – we look at them before quoting.

Current standing offers on every Whitney gate job: $50 Off Any Repair Over $250, a Free Second Opinion on Any Written Estimate, an $89 Seasonal Tune-Up, and a permanent 5% Senior and Veteran discount. Estimates are free.

FAQs – Driveway Gate

How much does a driveway gate repair cost in Whitney?

Most driveway gate repairs in Whitney run $350 to $900, depending on what’s failing. Hinge adjustments and latch fixes sit at the low end; motor replacements and keypad rewiring sit at the high end. Call (855) 928-1304 for an exact quote – estimates are free, and we’ll tell you upfront if a repair will hold or if replacement makes more sense.

Can you install a driveway gate the same week I call?

Usually, yes. Most driveway gate jobs in Whitney are scheduled within a few days of the estimate, and straightforward repairs are often done the same week. We won’t rush a job to promise you a date – we just give you the date we mean and show up on it. Call (855) 928-1304 to check availability.

What’s the difference between a sliding gate and a swinging gate for a Whitney driveway?

Sliding gates roll along a track or cantilever and need clearance along the fence line; swinging gates need clear space in front and behind. Whitney driveways tend to favor swinging gates where there’s room and sliding gates where the driveway is tight or on a slope. We’ll tell you which one fits your property before we quote.

Do you service my gate’s brand?

We service nine major gate automation brands, including Ghost Controls, DoorKing, Elite, and Mighty Mule. If your opener is one of these, we can usually diagnose and fix it on the first visit. Call (855) 928-1304 with the brand and model in hand and we’ll confirm before we head out.

Is it cheaper to repair my gate or replace it?

Repair is almost always cheaper in the short term, and we recommend it whenever the gate has more life in it. A cracked hinge or a tired motor is a repair; a rusted-through frame or a gate that’s out of square from post settlement is usually a replacement. We tell you honestly which one you’re looking at. Call (855) 928-1304 for a free estimate.

What’s included in the 90-Day Done Right Promise?

If anything we worked on fails within 90 days, we come back and make it right at no charge. No paperwork, no arguing. It’s the same standard we put behind every Whitney gate job, whether it’s a $350 hinge repair or a full driveway gate install. Call (855) 928-1304 to get started.

Ready to Close Off Your Driveway?

Whether your gate is dragging, refusing to latch, or you want one built from scratch, Ironworks Gate Co. Whitney is ready to help. Call (855) 928-1304 for a free estimate. A live person answers 24 hours a day, 7 days a week, and our technicians are background-checked, uniformed, and equipped to handle the job right the first time. Done right – and backed in writing.

Written by the team at Ironworks Gate Co. Whitney, serving Whitney.

Need Gate Repair help in Whitney? Licensed & insured · 1-hour response · free estimates
Call (855) 928-1304
Local Service Coverage

Request a Free Estimate in Whitney

Tell us what you need - Ironworks Gate Co. Whitney responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch