A Ironworks company - serving Whitney, NV

Mighty Mule Keypad & Intercom Repair in Whitney, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Mighty Mule Keypad & Intercom Repair: The Whitney Owner’s Guide

Mighty Mule keypad and intercom repair in Whitney typically runs $185 to $420 installed, depending on whether we’re swapping the keypad alone, the intercom module alone, or both on the same post, and most jobs are completed in a single visit. We quote the price before we touch a screwdriver, and the number you agree to is the number on the bill. Owners usually discover the failure the same way: the gate stops accepting the code they’ve punched for years, or the intercom goes silent on the house side while the gate still opens fine from the remote. Sometimes the keypad’s backlight is dead. Sometimes it works in the morning and not after a hot afternoon.

Call (855) 928-1304

Which Mighty Mule Models This Apply To

Mighty Mule’s keypad line runs across the swing and slide opener families – the MMS, FM, and TS series gates most Whitney homeowners have on their driveway – and the wireless keypads (the MMKP series and its revisions) are not interchangeable between them the way people assume. The label matters more than the box. Pull the cover off the keypad and you’ll find a model and revision stamp on the back plate; that revision number is what separates a drop-in replacement from one that powers up but won’t pair. Intercom modules are the same story. Mighty Mule has changed the wiring harness pinout between generations, so a keypad bought off a shelf for one revision can sit dead on a post wired for another.

On the OEM-versus-aftermarket decision, we’re plain about it: OEM Mighty Mule parts fit first time and carry the manufacturer’s coverage, at OEM pricing. Quality aftermarket equivalents cost less and work fine when the revision matches, but the cheap no-name keypads sold online are where we see the most callbacks – they fail in the desert heat inside a season. We’ll show you both options and tell you which we’d put on our own gate. Ironworks Gate Co. Whitney is an independent service provider and is not affiliated with Mighty Mule.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your Mighty Mule Keypad & Intercom Repair Is Failing

  • The gate ignores a code that used to work. Usually a worn membrane keypad or a keypad that lost its pairing after a power blip – the code never changed, the electronics did.
  • The keypad backlight is dark but the gate still opens by remote. That’s a power or ground fault at the keypad post, not the opener. Common in Whitney after a monsoon-season lightning strike or a sprinkler head soaking the post base.
  • The intercom crackles, cuts out, or goes silent on the house side. Typically a failed speaker module or corrosion at the wire connections where the intercom meets the gate post – our summer heat and winter cold cycles work those connections loose.
  • You have to press the code two or three times. A failing keypad membrane or a tired control board. It works less and less until it stops.
  • The keypad works in cool weather and quits by afternoon. Classic heat-related component failure. Direct sun on a metal post in a Whitney summer is brutal on the electronics inside.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what Whitney homeowners typically see, parts and labor together:

  • Keypad replacement, OEM: $185 to $280 installed.
  • Keypad replacement, quality aftermarket: $150 to $220 installed.
  • Intercom module replacement: $220 to $340 installed.
  • Keypad and intercom together, same post: $320 to $420 installed.
  • Wiring repair at the post (corroded or damaged connections): $95 to $180, added only when we find it.

The range is driven by model revision, whether the post needs re-drilling or a new mounting plate, and whether the wiring is sound. We quote it upfront, you approve it, and we don’t start until you do. Every keypad and intercom job is backed by our written 90-Day Done Right Promise: if it’s not right, we come back and make it right.

DIY or Call Us?

Some checks are safe for a homeowner: confirm the keypad has power, look for water in the housing, check that the code hasn’t been cleared, and make sure the wire connections at the post aren’t corroded. That’s where it stops. The keypad and intercom share low-voltage wiring with the opener’s control board, and a miswired replacement can damage the board – a far more expensive repair than the keypad itself. On a Mighty Mule, getting the revision wrong means a part that won’t pair no matter how carefully it’s installed. Call us at (855) 928-1304 and we’ll tell you straight whether it’s a five-minute fix or a swap.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 1-hour response · free estimates
Call (855) 928-1304
Local Service Coverage

Request a Free Estimate in Whitney

Tell us what you need - Ironworks Gate Co. Whitney responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch