A Ironworks company - serving Whitney, NV

Ghost Controls Gate Parts & Welding in Whitney, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Parts & Welding in Whitney: What to Know First

We’re an independent Ghost Controls service provider offering gate parts and welding in Whitney: hinge and post replacement, rail repair, custom welding, rollers, and latch and lock work on Ghost Controls residential and estate systems. Most single-visit jobs are scheduled within a few days of your call, and the price is settled before a single bolt is turned, so the bill matches the quote. Parts are quoted line by line: you approve the parts, you know the number, and that number doesn’t move.

Call (855) 928-1304

This page is for homeowners in Whitney who own a Ghost Controls gate and want it fixed once, correctly, and backed in writing. If you have a Ghost Controls unit and a sagging gate, a hinge that’s pulling out of the post, or an arm that no longer squares up when it closes, call us at (855) 928-1304. A live person answers.

How Ghost Controls Products Fail – and How We Fix Them

Ghost Controls makes a solid line – the Heavy Duty Single and Dual (the TSS1 and TDS2 arms), the Light Duty (TSL1), and the Aristocrat series for estate-sized gates – but on a gate in Whitney these units fail in a few predictable ways, and most of them are metal problems before they’re motor problems. Here are the ones we see most.

  • Gate sag against a Heavy Duty TDS2 dual-gate arm. On a dual swing gate, one leaf often drops 1/4 inch to 1/2 inch over a season, and the Ghost Controls controller reads that leaf as out of position and reverses it. The arm isn’t failing. The hinge is worn or the post has leaned, and the controller is doing exactly what it should. We reset the gate first, then re-dial the arm.
  • Hinge pin binding on the Light Duty TSL1. Ghost Controls residential arms push with less strength than estate arms, so a hinge that needs only a drop of oil on a heavier gate will stall a TSL1 outright. We free the hinge, check the pin for galling, and replace the pin rather than the whole hinge bracket when the metal is still sound.
  • Rail weld cracking. Tube steel gates welded years ago on a driveway in Whitney take the summer heat and the winter cold, and a weld at the bottom rail can open a hairline crack you’ll only notice when the gate starts to drag. We grind it out, re-weld it, and touch up the paint so the corner holds.
  • Arm bracket working loose on the post. The Ghost Controls factory bracket lag screws into wood posts. When a wood post dries and checks, those screws loosen, and the arm quickly wears at the pin. We re-anchor with the correct length lag or through-bolt, and we weld a reinforcement plate where the post deserves it.
  • Controller fault codes after a power surge. A Ghost Controls unit will behave as though it has lost its limits after a summer storm surge. The owner calls us expecting a motor. Often the trouble is a squiffed arm position against a stuck gate. We test the arm, clear the limits, and check the gate for obstruction before recommending anything.

None of the fixes above add up to a whole gate replacement, and none of them require you to chase Ghost Controls’s own support line. We come out, look, and tell you plainly.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Ghost Controls Gate Parts & Welding Process

  1. 1
    Diagnostic on the gate, not just the arm. We check the gate’s swing, the hinge wear, the post plumb, and the arm’s travel. Most Ghost Controls complaints start as a metal problem, so we test the gate before we test the electronics.
  2. 2
    Parts decision, spelled out. If the part is a Ghost Controls OEM arm pin, a replacement bracket, or a hinge, we quote the OEM price; if a quality aftermarket roller or pin-pair is a better value and won’t void the warranty on the automation, we quote both and let you choose. We tell you which choice protects the warranty and which choice saves money.
  3. 3
    Repair and weld on site. Hinge replacement, post replacement, rail repair, and custom welding happen in one visit when we have the parts on hand. The welder is set up, the gate is braced, and the weld is dressed.
  4. 4
    Test against the controller. We cycle the gate back through the Ghost Controls controller, confirm the limits, test the safety reverse, and confirm no fault codes remain. If we adjusted limits after the weld, we tell you what we changed.
  5. 5
    Cleanup and walk-through. Grinder dust swept, tarp taken down, gate left closed and operational. You get a plain walk-through of what was replaced and what to expect.
  6. 6
    90-Day Done Right Promise. Every job, every time. If it isn’t right, we come back and make it right, and you don’t have to argue.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Ghost Controls Gate Parts & Welding Costs in Whitney

Here’s the honest range for common Ghost Controls gate parts and welding in Whitney. These are typical ranges; the number you get on the day is the number we settle before we start.

Job Typical Range
Hinge replacement (per hinge) $95 – $220
Post replacement (wood or steel, one post) $180 – $475
Rail repair per section $145 – $340
Custom welding (per gate, minor to moderate) $120 – $390
Gate rollers or guide rebuild $80 – $180
Latch and lock installation or repair $110 – $280
Ghost Controls arm pin, bracket, or limit re-set (parts + labor) $135 – $290

What moves the price: the metal on the gate, whether the post needs to be set in concrete or just re-anchored, and how much repair the weld needs before it holds. We don’t sell upgrades you don’t need, and we don’t hide labor in the parts price. Call (855) 928-1304 for a free estimate, and the price is agreed before any work starts.

Why Whitney Homeowners Call Ironworks Gate Co. Whitney for Ghost Controls Work

We’re the gate specialist Whitney homeowners call when the job has to be done once. Our technicians have up to 13 years of experience, and they’re trained and equipped to service nine gate-automation brands – Ghost Controls among them, alongside LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, and Mighty Mule. That matters because the right fix on a Ghost Controls arm is often a metal fix first: the gate has to hang true before the arm makes sense. We’re background-checked, uniformed, and live person answers the phone 24 hours a day, 7 days a week. And every job is backed in writing by our 90-Day Done Right Promise. Ask us for a free second opinion on any written estimate; we’ll be honest about it.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 1-hour response · free estimates
Call (855) 928-1304
Local Service Coverage

Request a Free Estimate in Whitney

Tell us what you need - Ironworks Gate Co. Whitney responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch