A Ironworks company - serving Whitney, NV

FAAC Hinge & Roller Replacement in Whitney, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

FAAC Hinge & Roller Replacement: The Whitney Owner’s Guide

Hinge and roller replacement on a FAAC gate in Whitney usually runs $220 to $480 installed, and most repairs are completed the same day you call. We match the correct hinge and roller to your exact FAAC model, set the alignment, and hand you a written price before any bolt is turned. When a hinge or roller starts to go, owners rarely notice it in the abstract. They notice that the gate drags on the driveway, sags a half-inch, or squeals loud enough to hear from the kitchen. In Whitney, the swing gates on older estates often carry original hardware that has simply reached the end of its service life.

Call (855) 928-1304

Which FAAC Models This Applies To

FAAC hardware shows up on a lot of Whitney driveways, and the hinge and roller specs are not universal across the line. FAAC swing operators and the gate leaves they drive use different hinge pin diameters and roller widths depending on the era and the operator family. We see a lot of FAAC 390 and 391 operators driving residential swing gates, and the hinges paired with those are usually the small-pin type. The larger estate leaves often carry a heavier hinge with a wider roller. The compatibility gotcha is real: a hinge that looks identical to the eye can have a pin diameter one millimeter off, and that gate will not seat correctly no matter how carefully you adjust it.

Before we order anything, we read the identification plate on the operator housing, measure the existing hinge pin and roller width, and confirm the load rating of the leaf. We work with genuine FAAC-compatible parts and checked aftermarket equivalents where the match is exact and the savings are real. For lift motor repairs across the lineup, we also service LiftMaster, Mighty Mule, and Ghost Controls, and the operator brand does not change how we approach the hinge and roller. Ironworks Gate Co. Whitney is an independent service provider. We’re not affiliated with FAAC.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your FAAC Hinge & Roller Replacement Is Failing

  • The gate sags and drags. A worn hinge pin lets the leaf drop by a quarter-inch or more, and that clearance disappears into the driveway. You’ll see scrape marks on the concrete before you see anything wrong with the hinge itself.
  • A loud squeal on every cycle. Rollers that have flat-spotted or dried out will squeal under the weight of the leaf. Grease quiets it for a week and then the sound comes back, because the bearing is gone, not just dry.
  • The gate hesitates or reverses mid-swing. A binding hinge forces the FAAC operator to work harder, and most modern operators detect that resistance and reverse for safety. The operator is not the problem; the frozen hinge is.
  • Visible rust bloom or metal dust at the pivot. Whitney’s dry summers and cold desert nights are hard on unprotected steel. Rust at the hinge pin or fine metal dust around the roller tells you the part is grinding itself down.
  • The leaf wobbles when you push it by hand. Open the gate halfway and rock it gently. More than a slight give means the hinge is loose on the post or the roller has worn flat, and a loose hinge accelerates wear on the operator arm.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Whitney, a single hinge-and-roller swap typically lands between $220 and $480 installed for a residential swing gate. A full set on a heavy estate leaf with four hinges and larger rollers can reach $650 to $900. The range comes down to three things: how many pivots are being replaced, the weight and width of the gate leaf, and whether the operator arm and post brackets need realignment once the new hardware is in. Our technicians have up to 13 years of experience, and the price we quote is the price you pay. It’s settled before the first bolt comes off, and you won’t find a surprise at the bottom of the invoice.

Every job is protected by the 90-Day Done Right Promise: if the hardware is not right, we come back and make it right, in writing, no arguing. That covers the parts we install and the alignment work. If you have a written estimate from another company, we’ll give you a free second opinion before you commit.

DIY or Call Us?

A homeowner can safely check a few things. Open the gate by hand and feel for binding. Look at the hinge pins for rust and the rollers for flat spots. Tighten any loose post bolts you can reach with a socket wrench. That much tells you whether you have a hardware problem or something else.

What we don’t recommend is pulling a loaded gate leaf off its hinges yourself. A steel or wrought-iron leaf on a Whitney estate gate can weigh several hundred pounds, and once the top hinge comes free there is nothing holding it up but you. A dropped leaf can crush a foot, crack a driveway, or twist the operator arm and turn a $300 hinge job into a $1,200 repair. We bring the right jacks and blocking, set the new hardware to the correct pin depth, and realign the operator before we leave. Call (855) 928-1304 and we’ll give you a straight answer on whether your FAAC gate needs the hinge and roller replaced or just adjusted.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 1-hour response · free estimates
Call (855) 928-1304
Local Service Coverage

Request a Free Estimate in Whitney

Tell us what you need - Ironworks Gate Co. Whitney responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch