Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFAAC Hinge & Roller Replacement: The Whitney Owner’s Guide
Hinge and roller replacement on a FAAC gate in Whitney usually runs $220 to $480 installed, and most repairs are completed the same day you call. We match the correct hinge and roller to your exact FAAC model, set the alignment, and hand you a written price before any bolt is turned. When a hinge or roller starts to go, owners rarely notice it in the abstract. They notice that the gate drags on the driveway, sags a half-inch, or squeals loud enough to hear from the kitchen. In Whitney, the swing gates on older estates often carry original hardware that has simply reached the end of its service life.
Which FAAC Models This Applies To
FAAC hardware shows up on a lot of Whitney driveways, and the hinge and roller specs are not universal across the line. FAAC swing operators and the gate leaves they drive use different hinge pin diameters and roller widths depending on the era and the operator family. We see a lot of FAAC 390 and 391 operators driving residential swing gates, and the hinges paired with those are usually the small-pin type. The larger estate leaves often carry a heavier hinge with a wider roller. The compatibility gotcha is real: a hinge that looks identical to the eye can have a pin diameter one millimeter off, and that gate will not seat correctly no matter how carefully you adjust it.
Before we order anything, we read the identification plate on the operator housing, measure the existing hinge pin and roller width, and confirm the load rating of the leaf. We work with genuine FAAC-compatible parts and checked aftermarket equivalents where the match is exact and the savings are real. For lift motor repairs across the lineup, we also service LiftMaster, Mighty Mule, and Ghost Controls, and the operator brand does not change how we approach the hinge and roller. Ironworks Gate Co. Whitney is an independent service provider. We’re not affiliated with FAAC.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your FAAC Hinge & Roller Replacement Is Failing
- The gate sags and drags. A worn hinge pin lets the leaf drop by a quarter-inch or more, and that clearance disappears into the driveway. You’ll see scrape marks on the concrete before you see anything wrong with the hinge itself.
- A loud squeal on every cycle. Rollers that have flat-spotted or dried out will squeal under the weight of the leaf. Grease quiets it for a week and then the sound comes back, because the bearing is gone, not just dry.
- The gate hesitates or reverses mid-swing. A binding hinge forces the FAAC operator to work harder, and most modern operators detect that resistance and reverse for safety. The operator is not the problem; the frozen hinge is.
- Visible rust bloom or metal dust at the pivot. Whitney’s dry summers and cold desert nights are hard on unprotected steel. Rust at the hinge pin or fine metal dust around the roller tells you the part is grinding itself down.
- The leaf wobbles when you push it by hand. Open the gate halfway and rock it gently. More than a slight give means the hinge is loose on the post or the roller has worn flat, and a loose hinge accelerates wear on the operator arm.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Whitney, a single hinge-and-roller swap typically lands between $220 and $480 installed for a residential swing gate. A full set on a heavy estate leaf with four hinges and larger rollers can reach $650 to $900. The range comes down to three things: how many pivots are being replaced, the weight and width of the gate leaf, and whether the operator arm and post brackets need realignment once the new hardware is in. Our technicians have up to 13 years of experience, and the price we quote is the price you pay. It’s settled before the first bolt comes off, and you won’t find a surprise at the bottom of the invoice.
Every job is protected by the 90-Day Done Right Promise: if the hardware is not right, we come back and make it right, in writing, no arguing. That covers the parts we install and the alignment work. If you have a written estimate from another company, we’ll give you a free second opinion before you commit.
DIY or Call Us?
A homeowner can safely check a few things. Open the gate by hand and feel for binding. Look at the hinge pins for rust and the rollers for flat spots. Tighten any loose post bolts you can reach with a socket wrench. That much tells you whether you have a hardware problem or something else.
What we don’t recommend is pulling a loaded gate leaf off its hinges yourself. A steel or wrought-iron leaf on a Whitney estate gate can weigh several hundred pounds, and once the top hinge comes free there is nothing holding it up but you. A dropped leaf can crush a foot, crack a driveway, or twist the operator arm and turn a $300 hinge job into a $1,200 repair. We bring the right jacks and blocking, set the new hardware to the correct pin depth, and realign the operator before we leave. Call (855) 928-1304 and we’ll give you a straight answer on whether your FAAC gate needs the hinge and roller replaced or just adjusted.
FAQs
Most FAAC hinge and roller sets last 8 to 12 years on a residential swing gate in Whitney, and heavy estate leaves in full sun often fail closer to the 8-year mark. The dry desert air slows corrosion compared to a coastal climate, but the daily temperature swing and the dust that collects in the roller bearings wear them out from the inside. A gate that cycles twenty times a day will go through hardware faster than one used twice a day.
Sometimes. A hinge with a worn pin and solid plates can often be rebuilt with a new pin and bushing, and that costs less than a full replacement. What we won’t do is rebuild a hinge with a cracked plate or a post bracket that has pulled loose from the concrete; that hinge fails again within a season. We’ll tell you which one you have after we look at it, and the price is quoted before we start. Call (855) 928-1304 for a free estimate.
A single hinge and roller set on a residential FAAC gate usually takes 1 to 2 hours, and a full four-hinge estate set runs 3 to 4 hours. The work includes removing the old hardware, setting the new pins and rollers, realigning the leaf, and cycling the gate with the operator to confirm it tracks true. Most Whitney jobs are finished in one visit. If the post brackets or operator arm need repair, we’ll tell you before we add it to the ticket.
We identify your FAAC operator from the model plate, measure the existing pin diameter and roller width, and match a compatible hinge and roller to those specs. Genuine FAAC-compatible parts and verified aftermarket equivalents are both options, and we’ll show you the difference in price and spec before you decide. We don’t carry parts on a truck; the correct hardware is ordered to your gate. To get started, call (855) 928-1304 for a free estimate.
If your FAAC gate is dragging, squealing, or wobbling, don’t wait for the operator to start reversing on every cycle. Call Ironworks Gate Co. Whitney at (855) 928-1304 for a free estimate. We’ll match the right hinge and roller to your FAAC model, quote the price upfront, and back the work with the 90-Day Done Right Promise. Standing offers include $50 Off Any Repair Over $250, a Free Second Opinion on Any Written Estimate, an $89 Seasonal Tune-Up, and a permanent 5% Senior and Veteran discount.
Written by the team at Ironworks Gate Co. Whitney, serving Whitney and nearby areas.