A Ironworks company - serving Whitney, NV

LiftMaster Keypad & Intercom Repair in Whitney, NV

LiftMaster operatorsLiftMaster operators
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

LiftMaster Keypad & Intercom Repair: The Whitney Owner’s Guide

In Whitney, a failed LiftMaster keypad or intercom is typically repaired or replaced for $145 to $420 installed, and most keypad jobs are done the same day you call. Intercom systems with multiple tenant stations and long wire runs run higher and may need a scheduled visit. We install LiftMaster-compatible keypads and intercoms for homeowners across Whitney and the surrounding foothills, and we quote the price before any work begins.

Call (855) 928-1304

Most Whitney owners discover the failure the same way: the gate opens fine from the remote, but the keypad code no longer takes, or the intercom buzzes but no one can be heard. Sometimes it starts in summer, when the keypad face gets hot by early afternoon and the buttons stop responding. The gate and operator are working. Only the entry point has quit.

Which LiftMaster Models This Applies To

The keypads and intercoms we see most in Whitney pair with LiftMaster’s residential and light-commercial gate operators: the CSL24 series, the LA400 and LA500 swing operators, the RSL12, and the older SL series still running on plenty of driveways here. LiftMaster changed keypad and intercom wiring layouts across generations, and that is where owners get into trouble. A keypad built for a three-wire connection will not simply drop onto a two-wire operator terminal, and a unit that is wireless-only will not talk to an older board expecting a hardwired signal.

To identify what you have, look for the data plate on the operator housing (not the remote), and measure the keypad frame width before ordering. LiftMaster keypads vary between roughly 3 and 4.5 inches depending on the model line, and a faceplate that is too wide leaves screw holes showing on a mounted post.

On OEM versus aftermarket: LiftMaster OEM keypads are typically the widest-compatible choice when the operator board is original to the unit. A quality aftermarket keypad can work well when the board is older, or when the owner wants a larger backlit faceplate. We carry neither a warehouse nor parts on the truck, so every part is matched to your operator before we order, which is how we avoid a second trip.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your LiftMaster Keypad & Intercom Repair Is Failing

  • Code accepted, gate does nothing. Usually a failing keypad control board or a pinched wire at the post. If the gate opens on the remote but ignores the keypad, the fault is almost always in the keypad wiring, not the operator.
  • Buttons slow or dead in afternoon heat. Nevada sun cooks a keypad faceplate faster than the label claims. The membrane keypad behind the buttons hardens and loses contact on old units, and the problem returns every summer until the keypad is replaced.
  • Intercom buzzes but speech is garbled or one-sided. The speaker or microphone element has failed, or moisture has reached the station connection. Gate intercom stations take sun and dust in Whitney, and a droplet-sized corrosion point ruins a clean signal.
  • Backlight out, keypad dead. Power isn’t reaching the unit, or the wire run has a break. This is where we meter the terminals before we order anything, because a board fault looks identical to a dead keypad from the outside.
  • Works on one code, fails on another. The keypad memory or the operator’s stored codes have corrupted. This is a programming issue as often as a hardware issue, and it can often be reset without a new part.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Whitney, a LiftMaster-compatible keypad installed typically runs $145 to $280. A single-station intercom replacement is generally $220 to $420. Multi-station intercoms with longer wire runs and programming need a scheduled visit, and the range depends on how many stations you have and whether the wire itself needs to be run fresh.

Here is what the range moves on:

  • Keypad vs intercom: intercoms carry more components and more wiring.
  • Wire condition: a new wire run over a long driveway adds time and materials.
  • Station count: each added intercom station adds cost.
  • Programming: some operators need a code reset at the board, not just the keypad.

Every quote is a line item: part, labor, wire, programming. We agree the price before a single bolt is turned, and the work is backed by our written 90-Day Done Right Promise. Senior and Veteran discount is 5%, always.

DIY or Call Us?

There is a safe slice of this job you can check yourself: confirm the remote still opens the gate, look for obvious wire damage at the keypad post, and try a fresh code in the programming steps. That is where we would start too.

Where it goes wrong for owners: the keypad, intercom, and operator boards all share a low-voltage circuit, and a mixed-up wire or a wrong lead on a live terminal can damage the operator board. That turns a $145 keypad swap into an operator repair. On gate operators, this is electrical work tied directly to a moving gate. We recommend a trained professional at the point you’re ready to open the housing or touch the terminals.

Comfortable with our help here? Call (855) 928-1304 for a free estimate. A live person answers 24 hours a day, 7 days a week. Background-checked, uniformed technicians, and most keypad jobs are done in a single visit.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 1-hour response · free estimates
Call (855) 928-1304
Local Service Coverage

Request a Free Estimate in Whitney

Tell us what you need - Ironworks Gate Co. Whitney responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch