Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Summerlin
If your gate has stopped latching, sagged off its post, or shown up dead at dusk, you’re in the right place. Ironworks Gate Co. Whitney handles gate parts and welding for Summerlin homeowners. We know the villages, we know the guard gates, and we know why gates out here fail the way they do. When a heavy swing gate or a builder-installed solar operator gives out, the fix should be measured, matched, and guaranteed in writing. Call us at (855) 928-1304 and a live person picks up, any hour of the day or night.
Why Ironworks Gate Co. Whitney Is Summerlin’s Preferred Gate Parts & Welding Company
Summerlin gates are not like the gates in the older parts of the valley. Many driveway and courtyard gates in 89135 came in as original builder upgrades, often solar or low-voltage automated, and they were spec’d to a palette and a design the Summerlin Council already approved. That changes how parts get replaced. A hinge post, an arm, or a decorative panel has to match the original spec and the community’s approved colors, not whatever is in stock. Our technicians have up to 13 years of experience reading that spec before they touch the metal. We quote the price before the first bolt turns, and we back every job with the 90-Day Done Right Promise: if it isn’t right, we come back and make it right. Our crews live in these neighborhoods. When a gate in The Ridges won’t latch after a monsoon wind or a courtyard gate in Red Rock Country Club dies at dinnertime, the answer is usually the footing, not the panel.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Summerlin
Everything here is built around the way Summerlin gates actually wear. The desert decides much of it. The rest is the hardware the builder chose.
Hinge Replacement in Summerlin
Wrought-iron hinges take the load of the whole panel, and in Summerlin’s dry heat and blowing grit they wear faster than you’d expect. When a hinge binds or the welds crack, we replace the hinge with hardware matched to the gate’s material and the community’s approved finish. Rusted or frozen hinges get caught early on our seasonal tune-up. A drifting gate usually tells you it’s a hinge problem before the weld fails.

Post Replacement in Summerlin
The hinge post is the anchor for everything. In dry desert soil it can work loose, and a heavy gate that has to latch at the same spot every night will soon stop latching. Replacing or re-setting a post means probing the ground, digging the footing deeper, and re-leveling the gate before re-hanging it. We do that work before we ever blame the gate operator, because it usually isn’t the operator’s fault.

Rail Repair in Summerlin
Wide driveway gates load the top and bottom rails hardest, and UV-chalked powder coat lets moisture into the joints. We repair cracked or bowed rails, re-true the gate frame, and re-coat in a color matched to the Summerlin palette. On long-span rails, we check the entire run for flex, not just the broken section.

Custom Welding in Summerlin
Sometimes the exact replacement part doesn’t exist. A solar operator bracket, a decorative ironwork panel, or a custom latch assembly may need to be fabricated on site. Our welders work with wrought iron, steel, and aluminum and match the finish to the community’s approved palette. If you’re weighing repair against a fresh fabrication, our Gate Parts & Welding team can walk you through the options and price both up front.
Trusted Brands We Service in Summerlin
We’re trained and equipped on nine gate-automation brands, so the correct fix gets made on the first visit, whatever is on your driveway. Solar and low-voltage operators are especially common in Summerlin’s guard-gated villages, and most of them are Linear, Viking, or Ghost Controls units that arrived as builder upgrades. We don’t promise stocked parts. What we do promise is a fast turnaround, a clear diagnosis, and hardware spec’d to the original installation and the community’s approved palette. Solar opener batteries and control boards are a frequent replacement on older Summerlin installs, and we handle those alongside the mechanical side of the gate.
Common Gate Parts & Welding Problems We See in Summerlin Homes
- Solar openers dying at dusk. In a guard-gated village, a solar gate operator that quits at the end of the day is a security concern and an HOA problem. Regular 100°F+ summers cook the battery and control board faster than in milder climates.
- Hinge post footings working loose in the desert soil. Heavy wrought-iron swing gates sag when the footing loses grip, and the panel stops latching at the same point every night. A gate that only latches when you lift it is a post problem.
- Powder coat chalking and fading within a few years. Intense UV breaks down the finish quickly, and replacement parts must match the Summerlin Council’s approved color palette, so the fix is spec’d, not grabbed off the shelf.
- Grit-fouled rollers and hinge pins. The dry, dusty air here works abrasive grit into every moving part. Seasonal cleaning and lubrication keeps the hardware moving smoothly and catches worn parts before they fail.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Parts & Welding in Summerlin, NV
Pricing in Summerlin sits where the housing stock does: higher than in most surrounding Clark County neighborhoods, because the job often means matching an approved palette and a builder-installed spec rather than fitting whatever standard part is on the shelf. A typical hinge replacement in Summerlin runs $150 – $350. A hinge post re-set or replacement runs $350 – $850. Rail repair and small weld repairs run $120 – $400, and a builder-spec custom wrought-iron fabrication runs $500 – $1,800 depending on scope. Solar opener battery and board replacement runs $200 – $550 on most builder-installed units. Your written estimate is quoted and agreed before any work starts, so there are no surprises on the bill. Ask about $50 off any repair over $250 and our permanent 5% senior and veteran discount.
We Also Serve Cities Near Summerlin
We work Summerlin and the neighborhoods around it. If you’re just outside the master plan and don’t want to wait on a shop that only covers the strip, our team covers Summerlin and the surrounding communities, including Spring Valley, Las Vegas, Winchester, and Paradise. Same upfront pricing, same 90-Day Done Right Promise, same live phone line every day of the week.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Summerlin
Because the panel usually is fine; the hinge post footing has worked loose in the desert soil. A heavy wrought-iron swing gate sits on a post that takes the whole load, and when the footing loses grip, the gate sags and stops latching. The standard repair is to probe the ground, re-set or replace the post, then correct the sag and re-hang the gate. Call (855) 928-1304 for an exact quote, and estimates are free.
It’s common with builder-installed solar operators here, and it’s fixable without replacing the whole opener. Summer temperatures over 100°F combined with intense UV cook the battery and control board faster than in milder climates. A battery and board replacement on most Summerlin units runs $200 – $550. We service Linear, Viking, and Ghost Controls solar operators on the first visit whenever possible.
Yes, as long as the replacement parts match the community’s approved materials, colors, and ironwork styles. The Summerlin Architectural Review guidelines govern what a village gate can look like, so a technician who grabs a generic off-the-shelf panel risks a compliance problem down the line. We spec hardware to the original builder installation and the approved palette. Call (855) 928-1304 to schedule a free measurement and get a written price.
Yes. On any automated gate, entrapment protection is part of the safety check, and it should be verified any time the gate operator, hinges, or posts are touched. That means photo eyes, edge sensors, and the reversal settings, plus a test that the gate stops and reverses as it should. This isn’t a step to skip on a heavy swing gate, particularly one mounted on a newly re-set post. A trained technician should perform this check, not a homeowner with a wrench. Call (855) 928-1304 for a free estimate.
The hinge post footing and the hinge hardware, in that order. Long-driveway gates load the posts and hinges hardest, and the dry desert soil under Summerlin lets those footings loosen faster than the gate mechanism itself. Solar opener batteries and control boards follow close behind on automated installs. Catching the wear at a seasonal tune-up avoids a full post replacement. Call (855) 928-1304 to book one.
Get Your Summerlin Gate Repaired Right
Whether it’s a hinge post that has worked loose, a solar opener that won’t survive the summer, or a decorative panel that needs custom welding, Ironworks Gate Co. Whitney can help. Our technicians are background-checked and uniformed, our pricing is upfront and written, and every job is backed by the 90-Day Done Right Promise. Call (855) 928-1304 for a free estimate, any day, any hour.
Written by the team at Ironworks Gate Co.